Yayınlar

Yayınlar

Types

Dates

 to 

2013-2018

  • Makaleler
    Demir, Eralp and Mercan, Safiye Canset (2018) "A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response", International Journal of Machine Tools and Manufacture, Vol.134, 25-41 (SCI)
    Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)
    Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems", Mechanical Systems and Signal Processing, Vol.111, 423-441 (SCI)
    Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)
    Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2018) "Selective IR response of highly textured phase change VO2 nanostructures obtained via oxidation of electron beam deposited metallic V films", Optical Materials Express, Vol.8, No.8, 2035-2049 (SCI)
    Tunç, Lütfi Taner and Özşahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes". Published Online First http://dx.doi.org/10.1007%2Fs40436-018-0233-x
    Aran, Volkan and Ünel, Mustafa (2018) "Gaussian process regression feedforward controller for diesel engine airpath", International Journal of Automotive Technology, Vol.19, No.4, 635-642 (SCI)
    Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)
    Karagüzel, Umut and Budak, Erhan (2018) "Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods". Published Online First http://dx.doi.org/10.1016/j.jmatprotec.2018.07.024
    Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) "Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability", CIRP Annals - Manufacturing Technology, Vol.67, No.1, 397-400 (SCI)
    Toprakhisar, Burak and Nadernezhad, Ali and Bakırcı, Ezgi and Khani, Navid and Akdeniz Skvortsov, Gözde and Koç, Bahattin (2018) "Development of bioink from decellularized tendon extracellular matrix for 3D bioprinting". Published Online First http://dx.doi.org/10.1002/mabi.201800024
    Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
    Evren Han, Sanem and Ünel, Mustafa (2018) "An acceleration-based hybrid learning-adaptive controller for robot manipulators". Published Online First http://dx.doi.org/10.1177/0142331218780224
    Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)
    Shojaeian, Mostafa and Nedaei, Masoumeh and Yıldız, Mehmet and Koşar, Ali (2018) "Numerical heat transfer and entropy analysis on liquid slip flows through parallel-plate microchannels", Journal of Thermal Science and Engineering Applications, Vol.10, No.2 (SCI)
    Mohammad Moradi, Omid and Şen, Canhan and Boni, A. G. and Pintilie, L. and Mısırlıoğlu, Burç (2018) "Strong composition dependence of resistive switching in Ba1-xSrxTiO3 thin films on semiconducting substrates and its thermodynamic analysis", Acta Materialia, Vol.148, 419-431 (SCI)
    Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) "Single additive enables 3D printing of highly loaded iron oxide suspensions", ACS Applied Materials & Interfaces, Vol.10, No.11, 9873-9881 (SCI)
    Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) "Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1617-1634 (SCI)
    Bagherzadeh, Amin and Budak, Erhan (2018) "Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach", Tribology International, Vol.119, 510-520 (SCI)
    Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) "Biomedical device prototype based on small scale hydrodynamic cavitation", AIP Advances, Vol.8, No.3 (SCI)
    Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)
    Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) "Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection", Desalination, Vol.429, 20-32 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)
    Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) "Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation", Experimental Thermal and Fluid Science, Vol.91, 89-102 (SCI)
    Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2018) "Efficient strategies for reliability-based design optimization of variable stiffness composite structures", Structural and Multidisciplinary Optimization, Vol.57, No.2, 689-704 (SCI)
    Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) "A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading", Composite Structures, Vol.186, 347-354 (SCI)
    Çakır, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) "Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face". Published Online First http://dx.doi.org/10.1007/s00170-017-1479-3
    Jahangiri, Sassan and Aravi, İpek and Işıkel Şanlı, Lale and Menceloğlu, Yusuf Z. and Özden Yenigün, Elif (2018) "Fabrication and optimization of proton conductive polybenzimidazole electrospun nanofiber membranes", Polymers for Advanced Technologies, Vol.29, No.1, 594-602 (SCI)
    Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
    Azvar, Milad and Budak, Erhan (2017) "Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies", International Journal of Machine Tools and Manufacture, Vol.123, 116-128 (SCI)
    Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
    Akhlaghi Baghoojari, Omid and Aytaş, Tunahan and Tatlı, Buse and Sezer, Dilek and Hodaei, Amin and Favier, Aurelie and Scrivener, Karen and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) "Modified poly(carboxylate ether)-based superplasticizer for enhanced flowability of calcined clay-limestone-gypsum blended Portland cement", Cement and Concrete Research, Vol.101, 114-122 (SCI)
    Oğuz, Oğuzhan and Şimşek, Eren and Bilge, Kaan and Menceloğlu, Yusuf Z. (2017) "Low density polypropylene/waste cellulose fiber composites by high-shear thermo-kinetic mixer", International Polymer Processing, Vol.32, No.5, 562-567 (SCI)
    Avaz, Merve Senem and Oğuz, Oğuzhan and Kurt, Hasan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2017) "Soft segment length controls morphology of poly(ethylene oxide) based segmented poly(urethane-urea) copolymers in a binary solvent", Computational Materials Science, Vol.138, 58-69 (SCI)
    Yılmaz, Çağatay and Yıldız, Mehmet (2017) "A study on correlating reduction in Poisson's ratio with transverse crack and delamination through acoustic emission signals", Polymer Testing, Vol.63, 47-53 (SCI)
    Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2017) "Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification", Mechanical Systems and Signal Processing, Vol.94, 312-321 (SCI)
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2017) "Modelling thermally induced deformations on tool during turn-milling (Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi)", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.32, No.3, 865-875 (SCI)
    Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)
    Rahmat, Amin and Koç, Bahattin and Yıldız, Mehmet (2017) "A systematic study on numerical simulation of electrified jet printing". Published Online First http://dx.doi.org/10.1016/j.addma.2017.08.004
    Oğuz, Oğuzhan and Koutsoumpis, Stefanos A. and Şimşek, Eren and Yılgör, Emel and Yılgör, İskender and Pissis, Polycarpos and Menceloğlu, Yusuf Z. (2017) "Effect of soft segment molecular weight on the glass transition, crystallinity, molecular mobility and segmental dynamics of poly(ethylene oxide) based poly(urethane-urea) copolymers", RSC Advances, Vol.7, No.65, 40745-40754 (SCI)
    Oğuz, Oğuzhan and Bilge, Kaan and Şimşek, Eren and Çıtak, Mehmet Kerem and Wis, Abdulmounem Alchekh and Özkoç, Güralp and Menceloğlu, Yusuf Z. (2017) "High-performance green composites of poly(lactic acid) and waste cellulose fibers prepared by high-shear thermokinetic mixing", Industrial and Engineering Chemistry Research, Vol.56, No.30, 8568-8579 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) "Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.99, 221-232 (SCI)
    Koutsoumpis, Stefanos and Raftopoulos, Konstantinos N. and Oğuz, Oğuzhan and Papadakis, Christine M. and Menceloğlu, Yusuf Z. and Pissis, Polycarpos (2017) "Dynamic glass transition of the rigid amorphous fraction in polyurethane-urea/SiO2 nanocomposites", Soft Matter, Vol.13, No.26, 4580-4590 (SCI)
    Oğuz, Oğuzhan and Şimşek, Eren and Koşak Söz, Çağla and Heinz, Özge and Yılgör, Emel and Yılgör, İskender and Menceloğlu, Yusuf Z. (2017) "Effect of filler content on the structure-property behavior of poly(ethylene oxide) based polyurethaneurea-silica nanocomposites". Published Online First http://dx.doi.org/10.1002/pen.24672
    Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and Özaydın İnce, Gözde and Koç, Bahattin (2017) "Cell sheet based bioink for 3D bioprinting applications", Biofabrication, Vol.9, No.2 (SCI)
    Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics", Diamond and Related Materials, Vol.76, 90-96 (SCI)
    Avaz, Merve Senem and Bardhan Roy, Rupak and Mokkapati, V. R. S. S. and Bozkurt, Ayhan and Pandit, Santosh and Mijakovic, Ivan and Menceloğlu, Yusuf Z. (2017) "Graphene based nanosensor for aqueous phase detection of nitroaromatics", RSC Advances, Vol.7, No.41, 25519-25527 (SCI)
    Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) "Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs", CIRP Annals - Manufacturing Technology, Vol.66, No.1, 229-232 (SCI)
    Taş, Cüneyt Erdinç and Hendessi, Saman and Baysal, Mustafa and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2017) "Halloysite nanotubes/polyethylene nanocomposites for active food packaging materials with ethylene scavenging and gas barrier properties", Food and Bioprocess Technology, Vol.10, No.4, 789-798 (SCI)
    Evren Han, Sanem and Yavuz, Fırat and Ünel, Mustafa (2017) "High precision stabilization of pan-tilt systems using reliable angular acceleration feedback from a master-slave Kalman filter". Published Online First http://dx.doi.org/10.1007/s10846-017-0522-9
    Yıldız, Yıldıray and Ünel, Mustafa and Demirel, Ahmet Eren (2017) "Nonlinear hierarchical control of a quad tilt-wing UAV: an adaptive control approach". Published Online First http://dx.doi.org/10.1002/acs.2759
    Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) "Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement", Scientific Reports, Vol.7 (SCI)
    Demir, Eralp (2017) "A physically based constitutive model for FCC single crystals with a single state variable per slip system", Modelling and Simulation in Materials Science and Engineering, Vol.25, No.1 (SCI)
    Ghorbani, Morteza and Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2017) "Experimental and numerical investigations on spray structure under the effect of cavitation phenomenon in a microchannel", Journal of Mechanical Science and Technology, Vol.31, No.1, 235-247 (SCI)
    Mısırlıoğlu, Burç and Alpay, S. P. (2017) "Compositionally graded ferroelectrics as wide band gap semiconductors: Electrical domain structures and the origin of low dielectric loss", Acta Materialia, Vol.122, 266-276 (SCI)
    Kocaman, Esat Selim and Akay, Erdem and Yılmaz, Çağatay and Türkmen, Halit Süleyman and Mısırlıoğlu, Burç and Suleman, Afzal and Yıldız, Mehmet (2017) "Monitoring the damage state of fiber reinforced composites using an FBG network for failure prediction", Materials, Vol.10, No.1 (SCI)
    Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix". Published Online First http://dx.doi.org/10.1002/adv.21802
    Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)
    Demir, Eralp (2016) "3D suspension characterization of a rapid transit vehicle using a multi-body dynamic model", Urban Rail Transit, Vol.2, No.3-4, 172-187 (NA)
    Hendessi, Saman and Seviniş, Emine Billur and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2016) "Antibacterial sustained-release coatings from halloysite nanotubes/waterborne polyurethanes", Progress in Organic Coatings, Vol.101, 253-261 (SCI)
    Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)
    Khalili Sadaghiani, Abdolali and Yıldız, Mehmet and Koşar, Ali (2016) "Numerical modeling of convective heat transfer of thermally developing nanofluid flows in a horizontal microtube", International Journal of Thermal Sciences, Vol.109, 54-69 (SCI)
    Sarıer, Nihal and Arat, Refik and Menceloğlu, Yusuf Z. and Önder, Emel and Boz, Ezgi Ceren and Oğuz, Oğuzhan (2016) "Production of PEG grafted PAN copolymers and their electrospun nanowebs as novel thermal energy storage materials", Thermochimica Acta, Vol.643, 83-93 (SCI)
    Levanyuk, A. P. and Minyukov, S. A. and Mısırlıoğlu, Burç (2016) "Negative bulk modulus and possibility of loss of elastic stability near tricritical transitions in thin films on substrates", Ferroelectrics, Vol.500, No.1, 116-128 (SCI)
    Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2016) "Tunable surface plasmon and phonon polariton interactions for moderately doped semiconductor surfaces", Scientific Reports, Vol.6 (SCI)
    Tunç, Lütfi Taner (2016) "Rapid extraction of machined surface data through inverse geometrical solution of tool path information", International Journal of Advanced Manufacturing Technology, Vol.87, No.1-4, 353-362 (SCI)
    Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) "The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability", Theoretical and Computational Fluid Dynamics, Vol.30, No.5, 469-483 (SCI)
    Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) "An experimental investigation of oblique cutting mechanics", Machining Science and Technology, Vol.20, No.3, 495-521 (SCI)
    Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) "Multifunctional 3D printing of heterogeneous hydrogel structures", Scientific Reports, Vol.6 (SCI)
    Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) "Three-dimensional direct cell bioprinting for tissue engineering". Published Online First http://dx.doi.org/10.1002/jbm.b.33768
    Yurtdaş Kırımlıoğlu, Gülsel and Menceloğlu, Yusuf Z. and Erol, Kevser and Yazan, Yasemin (2016) "In vitro/in vivo evaluation of gamma-aminobutyric acid-loadedN,N-dimethylacrylamide-based pegylated polymeric nanoparticles for brain delivery to treat epilepsy". Published Online First http://dx.doi.org/10.1080/02652048.2016.1234515
    Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) "Rheological behavior of poly(acrylonitrile) concentrated solutions: effect of Sb2O3 nanoparticles on shear and extensional flow", Colloid and Polymer Science, Vol.294, No.9, 1463-1473 (SCI)
    Akay, Erdem and Yılmaz, Çağatay and Kocaman, Esat Selim and Türkmen, Halit S. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio degradation of FRP composites under fatigue loading using biaxially embedded FBG sensors", Materials, Vol.9, No.9 (SCI)
    Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2016) "The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads". Published Online First http://dx.doi.org/10.1177/1099636216664777
    Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) "Chatter suppression techniques in metal cutting", CIRP Annals - Manufacturing Technology, Vol.65, No.2, 785-808 (SCI)
    Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa (2016) "A new visual tracking method for the analysis and characterization of jet flow". Published Online First http://dx.doi.org/10.1016/j.flowmeasinst.2016.08.005
    Yılmaz, Çağatay and Akalın, Çağdaş and Kocaman, Esat Selim and Suleman, A. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio of glass fiber reinforced composites as damage index using biaxial Fiber Bragg Grating sensors", Polymer Testing, Vol.53, 98-107 (SCI)
    Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) "Machining strategy development and parameter selection in 5-axis milling based on process simulations", International Journal of Advanced Manufacturing Technology, Vol.85, No.5-8, 1483-1500 (SCI)
    Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) "Process simulation integrated tool axis selection for 5-axis tool path generation", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 381-384 (SCI)
    Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) "Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering", Biofabrication, Vol.8, No.2 (SCI)
    Ghorbani, Morteza and Yıldız, Mehmet and Gözüaçık, Devrim and Koşar, Ali (2016) "Cavitating nozzle flows in micro- and minichannels under the effect of turbulence", Journal of Mechanical Science and Technology, Vol.30, No.6, 2565-2581 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. (2016) "Manufacturing of multilayer graphene oxide/poly(ethylene terephthalate) nanocomposites with tunable crystallinity, chain orientations and thermal transitions", Materials Chemistry and Physics, Vol.176, 58-67 (SCI)
    Saner Okan, Burcu and Marset Castro, Azucena and Seyyed Monfared Zanjani, Jamal and Akkuş Sut, Pınar and Şen, Özlem and Çulha, Mustafa and Menceloğlu, Yusuf Z. (2016) "Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l-lactide-co-ε-caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation", Journal of Applied Polymer Science, Vol.133, No.22 (SCI)
    Mısırlıoğlu, Burç and Şendur, Kürşat (2016) "Ferroelectric/semiconductor/tunnel-junction stacks for nondestructive and low-power read-out memory", IEEE Transactions on Electron Devices, Vol.63, No.6, 2374-2379 (SCI)
    Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) "Effects of tool axis offset in turn-milling process", Journal of Materials Processing Technology, Vol.231, 239-247 (SCI)
    Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) "Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 121-124 (SCI)
    Ghorbani, Morteza and Alcan, Gökhan and Ünel, Mustafa and Gözüaçık, Devrim and Ekici, Sinan and Üvet, Hüseyin and Şabanoviç, Asif and Koşar, Ali (2016) "Visualization of microscale cavitating flow regimes via particle shadow sizing imaging and vision based estimation of the cone angle". Published Online First http://dx.doi.org/10.1016/j.expthermflusci.2016.04.026
    Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) "A PCE-based rheology modifier allows machining of solid cast green bodies of alumina", Ceramics International, Vol.42, No.3, 3757-3761 (SCI)
    Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) "Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes", Journal of Sound and Vibration, Vol.360, 17-30 (SCI)
    Mısırlıoğlu, Burç and Şen, Canhan and Kesim, M. T. and Alpay, S. P. (2016) "Low-voltage ferroelectric-paraelectric superlattices as gate materials for field-effect transistors", Journal of Materials Science, Vol.51, No.1, 487-498 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2016) "Nano-engineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements", RSC Advances, Vol.6, No.12, 9495-9506 (SCI)
    Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) "Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings", Journal of Intelligent Material Systems and Structures, Vol.27, No.1, 17-27 (SCI)
    Akhlaghi Baghoojari, Omid and Akbulut, Özge and Menceloğlu, Yusuf Z. (2015) "Shear and extensional rheological characterization of poly(acrylonitrile)/halloysite nanocomposite solutions", European Polymer Journal, Vol.73, 17-25 (SCI)
    Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin (2015) "3-boyutlu biyobasım (3D bioprinting)", Türkiye Klinikleri Tıbbi Onkoloji Özel Dergisi, Vol.8, No.2, 155-161 (NA)
    Ghorbani, Morteza and Alcan, Gökhan and Yılmaz, D. and Ünel, Mustafa and Koşar, Ali (2015) "Visualization and image processing of spray structure under the effect of cavitation phenomenon", Journal of Physics: Conference Series, Vol.656 (SCI)
    Saner Okan, Burcu and Zanjani, Jamal Seyyed Monfared and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. (2015) "Morphology-controllable synthesis and characterization of carbon nanotube/polypyrrole composites and their hydrogen storage capacities", Materials Chemistry and Physics, Vol.167, 171-180 (SCI)
    Akhlaghi Baghoojari, Omid and Akbulut, Özge and Menceloğlu, Yusuf Z. (2015) "Extensional rheology and stability behavior of alumina suspensions in the presence of AMPS-modified polycarboxylate ether-based copolymers", Colloid and Polymer Science, Vol.293, No.10, 2867-2876 (SCI)
    Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations", Precision Engineering, Vol.42, 53-65 (SCI)
    Mısırlıoğlu, Burç and Yıldız, Mehmet and Şendur, Kürşat (2015) "Domain control of carrier density at a semiconductor-ferroelectric interface", Scientific Reports, Vol.5 (SCI)
    Haghighi Poudeh, Leila and Saner Okan, Burcu and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Design and fabrication of hollow and filled graphene-based polymeric spheres via core-shell electrospraying", RSC Advances, Vol.5, No.111, 91147-91157 (SCI)
    Aslan, Deniz and Budak, Erhan (2015) "Surface roughness and thermo-mechanical force modeling for grinding operations with regular and circumferentially grooved wheels", Journal of Materials Processing Technology, Vol.223, 75-90 (SCI)
    Üzüşen, Doğan and Demir, Ebru and Perk, Osman Yavuz and Oral, Özlem and Ekici, Sinan and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2015) "Assessment of probe-to-specimen distance effect in kidney stone treatment with hydrodynamic cavitation", Journal of Medical Devices, Vol.9, No.3 (SCI)
    Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet (2015) "An incompressible smoothed particle hydrodynamics method for the motion of rigid bodies in fluids", Journal of Computational Physics, Vol.297, 207-220 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Letofsky-Papst, Ilse and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Repeated self-healing of nano and micro scale cracks in epoxy based composites by tri-axial electrospun fibers including different healing agents", RSC Advances, Vol.5, No.89, 73133-73145 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Design and fabrication of multi-walled hollow nanofibers by triaxial electrospinning as reinforcing agents in nanocomposites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1273-1286 (SCI)
    Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Tang, S. and Hamada, H. and Yıldız, Mehmet (2015) "Effect of fiber densities on impact properties of biaxial warp-knitted textile composites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1287-1297 (SCI)
    Evren, Sanem and Ünel, Mustafa (2015) "Planar formation control of swarm robots using dynamical elliptic fourier descriptors", Transactions of the Institute of Measurement and Control (SI), Vol.37, No.5, 661-671 (SCI)
    Kocaman, Esat Selim and Keulen, Casey J. and Akay, Erdem and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2015) "An experimental study on the effect of length and orientation of embedded FBG sensors on the signal properties under fatigue loading". Published Online First http://dx.doi.org/10.1515/secm-2014-0029
    Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2015) "Analytical modeling of turn-milling process geometry, kinematics and mechanics", International Journal of Machine Tools and Manufacture, Vol.91, 24-33 (SCI)
    Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, M. (2015) "Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes", International Journal of Advanced Manufacturing Technology, Vol.77, No.9-12, 1993-2004 (SCI)
    Küçükgül, Can and Özler, Saime Burçe and İnci, İlyas and Karakaş, Hacer Ezgi and Irmak, Ster and Gözüaçık, Devrim and Taralp, Alpay and Koç, Bahattin (2015) "3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells", Biotechnology and Bioengineering, Vol.112, No.4, 811-821 (SCI)
    Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)
    Shadloo, Mostafa S. and Weiss, Robert and Yıldız, Mehmet and Dalrymple, Robert A. (2015) "Numerical simulation of long wave runup for breaking and nonbreaking waves", International Journal of Offshore and Polar Engineering, Vol.25, No.1, 1-7 (SCI)
    Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "In-process tool point FRF identification under operational conditions using inverse stability solution", International Journal of Machine Tools and Manufacture, Vol.89, 64-73 (SCI)
    Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2015) "Convective heat transfer and second law analysis of non-Newtonian fluid flows with variable thermophysical properties in circular channels", International Communications in Heat and Mass Transfer, Vol.60, 21-31 (SCI)
    Zanjani, Jamal Seyyed Monfared and Saner Okan, Burcu and Letofsky-Papst, Ilse and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Rational design and direct fabrication of multi-walled hollow electrospun fibers with controllable structure and surface properties", European Polymer Journal (SI), Vol.62, 66-76 (SCI)
    Kekeç, İbrahim Taygun and Yıldırım, Alper and Ünel, Mustafa (2014) "A new approach to real-time mosaicing of aerial images", Robotics and Autonomous Systems, Vol.62, No.12, 1755-1767 (SCI)
    Chimate, Chetan and Koç, Bahattin (2014) "Pressure assisted multi-syringe single nozzle deposition system for manufacturing of heterogeneous tissue scaffolds", International Journal of Advanced Manufacturing Technology, Vol.75, No.1-4, 317-330 (SCI)
    Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) "Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli", International Journal of Thermal Sciences, Vol.84, 252-259 (SCI)
    Mısırlıoğlu, Burç and Kesim, M. T. and Alpay, S. P. (2014) "Layer thickness and period as design parameters to tailor pyroelectric properties in ferroelectric superlattices", Applied Physics Letters, Vol.105, No.17 (SCI)
    Rahmat, Amin and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2014) "Numerical simulation of wall bounded and electrically excited Rayleigh-Taylor instability using incompressible smoothed particle hydrodynamics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.460, 60-70 (SCI)
    Khodabakhsh, Mohammadreza and Şen, Can and Khassaf, Hamidreza and Gülgün, Mehmet Ali and Mısırlıoğlu, Burç (2014) "Strong smearing and disappearance of phase transitions into polar phases due to inhomogeneous lattice strains induced by A-site doping in Bi(1-x)A(x)FeO(3) (A: La, Sm, Gd)", Journal of Alloys and Compounds, Vol.604, 117-129 (SCI)
    Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) "Virtual process systems for part machining operations", CIRP Annals - Manufacturing Technology, Vol.63, No.2, 585-605 (SCI)
    Mısırlıoğlu, Burç and Yıldız, Mehmet (2014) "Carrier accumulation near electrodes in ferroelectric films due to polarization boundary conditions", Journal of Applied Physics, Vol.116, No.2 (SCI)
    Samanta, Kuntal and Özbolat, İbrahim T. and Koç, Bahattin (2014) "Optimized normal and distance matching for heterogeneous object modeling", Computers & Industrial Engineering, Vol.69, 1-11 (SCI)
    Bilge, Kaan and Venkataraman, S. and Menceloğlu, Yusuf Z. and Papila, Melih (2014) "Global and local nanofibrous interlayer toughened composites for higher in-plane strength", Composites Part A: Applied Science and Manufacturing, Vol.58, 73-76 (SCI)
    Özel, Burcu and Örüm, Aslıhan and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2014) "Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids", Korea-Australia Rheology Journal, Vol.26, No.1, 105-116 (SCI)
    Özbulut, Murat and Yıldız, Mehmet and Gören, Ömer (2014) "A numerical investigation into the correction algorithms for SPH method in modeling violent free surface flows", International Journal of Mechanical Sciences, Vol.79, 56-65 (SCI)
    Mısırlıoğlu, Burç and Kesim, M. T. and Alpay, S. P. (2014) "Strong dependence of dielectric properties on electrical boundary conditions and interfaces in ferroelectric superlattices", Applied Physics Letters, Vol.104, No.2 (SCI)
    Kesim, M. T. and Cole, M. W. and Zhang, J. and Mısırlıoğlu, Burç and Alpay, S. P. (2014) "Tailoring dielectric properties of ferroelectric-dielectric multilayers", Applied Physics Letters, Vol.104, No.2 (SCI)
    Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2014) "Damage detection of composite plates by Lamb wave ultrasonic tomography with a sparse hexagonal network using damage progression trends", Shock and Vibration (SCI)
    Khoda, AKM Bashirul and Özbolat, İbrahim T. and Koç, Bahattin (2013) "Designing heterogeneous porous tissue scaffolds for additive manufacturing processes", Computer-Aided Design, Vol.45, No.12, 1507-1523 (SCI)
    Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) "Modeling and control of a variable speed variable pitch angle prototype wind turbine", Mathematical and Computational Applications, Vol.18, No.3, 408-420 (OTHER)
    Şahin, Caner and Ünel, Mustafa (2013) "Performance improvement in VSLAM using stabilized feature points", Mathematical and Computational Applications, Vol.18, No.3, 361-372 (OTHER)
    Kekeç, İbrahim Taygun and Ünel, Mustafa and Erdoğan, Hakan (2013) "Real-time multiple object tracking using virtual shells", Mathematical and Computational Applications, Vol.18, No.3, 373-382 (OTHER)
    Khoda, AKM Bashirul and Koç, Bahattin (2013) "Functionally heterogeneous porous scaffold design for tissue engineering", Computer-Aided Design, Vol.45, No.11, 1276-1293 (SCI)
    Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Very large dielectric response from ferroelectric nanocapacitor films due to collective surface and strain relaxation effects", Journal of Applied Physics, Vol.114, No.19 (SCI)
    Malay Heinz, Özge and Oğuz, Oğuzhan and Koşak, Çağla and Yılgör, Emel and Yılgör, İskender and Menceloğlu, Yusuf Z. (2013) "Polyurethaneurea–silica nanocomposites: preparation and investigation of the structure–property behavior", Polymer, Vol.54, No.20, 5310-5320 (SCI)
    Safdari Shadloo, Mostafa and Rahmat, Amin and Yıldız, Mehmet (2013) "A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid", Computational Mechanics, Vol.52, No.3, 693-707 (SCI)
    Tofighi, Nima and Yıldız, Mehmet (2013) "Numerical simulation of single droplet dynamics in three-phase flows using ISPH", Computers and Mathematics with Applications, Vol.66, No.4, 525-536 (SCI)
    Özden-Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Atılgan, Canan (2013) "Molecular basis for solvent dependent morphologies observed on electrosprayed surfaces", Physical Chemistry Chemical Physics, Vol.15, No.41, 17862-17872 (SCI)
    Khoda, AKM Bashirul and Özbolat, İbrahim T. and Koç, Bahattin (2013) "Modeling of variational gradient porous architecture with multi-directional filament deposition in 3D scaffolds", Computer-Aided Design & Applications, Vol.10, No.3, 445-459 (OTHER)
    Malay Heinz, Özge and Yılgör, İskender and Menceloğlu, Yusuf Z. (2013) "Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions", Journal of Sol-Gel Science and Technology, Vol.67, No.2, 351-361 (SCI)
    İnceoğlu, Funda and Menceloğlu, Yusuf Z. (2013) "Transparent low-density polyethylene/starch nanocomposite films", Journal of Applied Polymer Science, Vol.129, No.4, 1907-1914 (SCI)
    Özbolat, İbrahim T. and Marchany, Michelle and Joseph, A. Gardella, Jr., and Koç, Bahattin (2013) "Computer-aided 4D modeling of hydrolytic degradation in micropatterned bioresorbable membranes", Journal of Medical Devices, Vol.7, No.2 (SCI)
    Sadek, Samir Hassan Mahmoud and Yıldız, Mehmet (2013) "Modeling die swell of second-order fluids using smoothed particle hydrodynamics", Journal of Fluids Engineering, Vol.135, No.5 (SCI)
    Safdari Shadloo, Mostafa and Zainali, Amir and Yıldız, Mehmet (2013) "Simulation of single mode Rayleigh-Taylor instability by SPH method", Computational Mechanics, Vol.51, No.5, 699-715 (SCI)
    Tunç, Lütfi Taner and Budak, Erhan (2013) "Identification and modeling of process damping in milling", Journal of Manufacturing Science and Engineering, Vol.135, No.2 (SCI)
    Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Dielectric response of fully and partially depleted ferroelectric thin films and inversion of the thickness effect", Journal of Physics D: Applied Physics, Vol.46, No.12 (SCI)
    Zainali, Amir and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2013) "Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method", Computer Methods in Applied Mechanics and Engineering, Vol.254, 99-113 (SCI)
    Budak, Erhan and Çomak, Alptunç and Öztürk, Erdem (2013) "Stability and high performance machining conditions in simultaneous milling", CIRP Annals - Manufacturing Technology, Vol.62, No.1, 403-406 (SCI)
  • Kitap Bölümleri
    Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Polymer composites containing functionalized nanoparticles and the environment", Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications, Pielichowski, Krzysztof and Majka, Tomasz (eds.), Amsterdam: Elsevier, September 2018
    Yağış, Ekin and Ünel, Mustafa, "Facial expression based emotion recognition using neural networks", Image Analysis and Recognition, Campilho, Aurelio and Karray, Fakhri and Ter Haar Romeny, Bart (eds.), Switzerland: Springer, June 2018, 210-217
    Fuad, Zain and Ünel, Mustafa, "Human action recognition using fusion of depth and inertial sensors", Image Analysis and Recognition, Campilho, Aurelio and Karray, Fakhri and Ter Haar Romeny, Bart (eds.), Switzerland: Springer, June 2018, 373-380
    Budak, Erhan, "Machining process improvement through process twins", Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing, Ni, Jun and Majstorovic, Vidosav D. and Djurdjanovic, Dragan (eds.), Switzerland: Springer, May 2018, 164-179
    Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, "Single droplet tracking in jet flow", Image Analysis and Recognition: 13th International Conference, ICIAR 2016, in Memory of Mohamed Kamel, Póvoa de Varzim, Portugal, July 13-15, 2016, Proceedings, Campilho, Aurello and Karray, Fakhri (eds.), Switzerland: Springer International Publishing, July 2016, 415-422
    Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin, "Bioprinting with live cells", Bioprinting in Regenerative Medicine, Türksen, Kürşad (ed.), Switzerland: Springer, September 2015, 67-88
    Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, "Bioprinting: application of additive manufacturing in medicine", Additive Manufacturing, Bandyopadhyay, Amit and Bose, Susmita (eds.), United States: CRC Press, June 2015, 197-214
    Budak, Erhan, "CIRP Encyclopedia of Production Engineering (Chapter on machines)", CIRP Encyclopedia of Production Engineering, Laperrière, Luc and Reinhart, Gunther (eds.), NY: Springer, July 2014
    Rocha, B. and Silva, C. and Keulen, C. and Yıldız, Mehmet and Suleman, A., "New trends in SHM, structural health monitoring of aircraft structures", New Trends in Structural Health Monitoring, Wieslaw, Ostachowicz and Güemes, Alfredo (eds.), Germany: Springer, January 2013
  • Konferans Bildirileri
    Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem, "Diesel engine NOx emission modeling using a new experiment design and reduced set of regressors", Proceedings of 18th IFAC Symposium on System Identification (SYSID 2018), IFAC (International Federation of Automatic Control), July 2018
    Jamshidi, Hamid and Budak, Erhan, "Grinding temperature modeling based on a time dependent heat source", Stephan, Gabor (ed.), 8th CIRP Conference on High Performance Cutting (HPC 2018), Elsevier, June 2018
    Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan, "Investigating high productivity conditions for turn-milling in comparison to conventional turning", Stepan, Gabor (ed.), 8th CIRP Conference on High Performance Cutting (HPC 2018), Elsevier, June 2018
    Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter, "Identification of the CIRP expertise network based on public data", Kjellberg, T. and Wang, L. and Ji, W. and Wang, X. V. (eds.), 51st CIRP Conference on Manufacturing Systems, Elsevier, June 2018, 165-168
    Evren Han, Sanem and Ünel, Mustafa, "A new learning controller for periodic disturbance rejection", 11th Asian Control Conference (ASCC), IEEE (Institute of Electrical and Electronics Engineers), December 2017, 1035-1040
    Aran, Volkan and Ünel, Mustafa, "Data driven disturbance observer design and control for diesel engine airpath", 11th Asian Control Conference (ASCC), IEEE (Institute of Electrical and Electronics Engineers), December 2017, 2600-2605
    Evren Han, Sanem and Ünel, Mustafa, "Stabilization of pan-tilt systems using acceleration based LMI-LQR controller", 11th Asian Control Conference (ASCC), IEEE (Institute of Electrical and Electronics Engineers), December 2017, 2552-2557
    Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan, "Development of turn-milling machine tool program parameters based on basic cutting geometry", 8th International Symposium on Machining, UTIS, November 2017
    Ebrahimi Araghizad, Arash and Özlü, Emre and Budak, Erhan, "Geometrical optimization of broaching tools by leveling the cutting forces", 8th International Symposium on Machining, UTIS, November 2017
    Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre, "Modeling of tool temperature in orthogonal cutting", 8th International Symposium on Machining, UTIS, November 2017
    Tunç, Lütfi Taner and Sapmaz, Ömer Faruk, "Challenges for industrial robots towards milling applications", 8th International Symposium on Machining (UTIS 2017), UTIS, November 2017
    Tofighi, Nima and Yıldız, Mehmet and Suleman, Afzal, "Numerical simulation of the sedimentation of an elliptic particle under external electric field using ISPH", Onate, E. and Wriggers, P. and Zohdi, T. and Bischoff, M. and Owen, D. R. J. (eds.), 5th International Conference on Particle-Based Methods - Fundamentals and Applications (PARTICLES 2017), International Center for Numerical Methods in Engineering, September 2017, 918-929
    Erkoç İlter, Selda and Sharabati, Jalal and Saffarimiandoab, Farzin and Güçlü, Serkan and İmer, Derya Yüksel and Koyuncu, İsmail and Ünal, Serkan and Menceloğlu, Yusuf Z., "High performance polyamide thin film composite (PA-TFC) desalination membranes modified by zwitterionic silanes", 254th National Meeting and Exposition of the American-Chemical-Society (ACS) on Chemistry's Impact on the Global Economy, ACS (American Chemical Society), August 2017
    Sözer, Canberk and Ghorbani, Morteza and Alcan, Gökhan and Üvet, Hüseyin and Ünel, Mustafa and Koşar, Ali, "Design, prototyping and control of a flexible cystoscope for biomedical applications", 4th International Conference on Mechanics and Mechatronics Research (ICMMR 2017), IOP Publishing, August 2017
    Nadernezhad, Ali and Khani, Navid and Koç, Bahattin, "Biomanufacturing of heterogeneous hydrogel structures with patterned electrically conductive regions", Shih, Albert and Cao, Jian (eds.), 3rd CIRP Conference on BioManufacturing, Elsevier, July 2017, 44-47
    Kale, Sameer and Khani, Navid and Nadernezhad, Ali and Koç, Bahattin, "Modeling and additive manufacturing of biomimetic heterogeneous Scaffold", Shih, Albert and Cao, Jian (eds.), 3rd CIRP Conference on BioManufacturing, Elsevier, July 2017, 48-55
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Mechanical and thermal modeling of orthogonal turn-milling operation", Outerio, Jose and Poulachon, Gerard (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, July 2017, 287-292
    Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet S., "The effect of linear guide representation for topology optimization of a five-axis milling machine", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), Elsevier, June 2017, 487-492
    Tehranizadeh, Faraz and Budak, Erhan, "Design of serrated end mills for improved productivity", Outerio, Jose and Poulachon, Gerard (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, June 2017, 493-498
    Mohammadi, Yaser and Tunç, Taner L. and Budak, Erhan, "Investigation of process damping effect for multi-mode milling systems", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, June 2017, 198-203
    Alcan, Gökhan and Ünel, Mustafa, "Robust hovering control of a quadrotor using acceleration feedback", International Conference on Unmanned Aircraft Systems (ICUAS 2017), IEEE (Institute of Electrical and Electronics Engineers), June 2017
    Zaki, Hammad and Ünel, Mustafa and Yıldız, Yıldıray, "Trajectory control of a quadrotor using a control allocation approach", International Conference on Unmanned Aircraft Systems (ICUAS 2017), IEEE (Institute of Electrical and Electronics Engineers), June 2017
    Yaqoob, Muhammad Hassan and Budak, Erhan, "An alternative methodology for machine tool error determination through workpiece measurement", 6th International Conference on Virtual Machining Process Technology (VMPT), Elsevier, May 2017
    Jamshidi, Hamid and Yastıkcı, Batuhan and Gürtan, Mert and Budak, Erhan, "Grinding force model for Inconel 718 with CBN and conventional wheels", 6th International Conference on Virtual Machining Process Technology (VMPT), Elsevier, May 2017
    Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat, "Voltage control of surface plasmon and phonon interactions in doped semiconductor-dielectric interfaces", Witzigmann, B. and Osinski, M. and Arakawa, Y. (eds.), Physics and Simulation of Optoelectronic Devices XXV, SPIE (Society of Photo-Optical Instrumentation Engineers), February 2017
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi", Kaynak, Yusuf (ed.), 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Marmara University, November 2016
    Yastıkcı, Batuhan and Jamshidi, Hamid and Budak, Erhan, "Experimental investigation of wear mechanisms with electroplated CBN wheel", 19th International Symposium on Advances in Abrasive Technology, ISAAT, October 2016
    Aran, Volkan and Ünel, Mustafa, "Feedforward mapping for engine control", 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE (Institute of Electrical and Electronics Engineers), October 2016, 154-159
    Yavuz, Fırat and Ünel, Mustafa, "Robust balancing and position control of a single spherical wheeled mobile platform", 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE (Institute of Electrical and Electronics Engineers), October 2016, 613-618
    Evren Han, Sanem and Ünel, Mustafa, "Stabilization of a pan-tilt system using a polytopic quasi-LPV model and LQR control", 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE (Institute of Electrical and Electronics Engineers), October 2016, 636-641
    Budak, Erhan, "Improving productivity in machining processes through modeling", Bleicher, Friedrich (ed.), 3. Wiener Produktionstechnik Kongress 2016 Adaptive & Smart Manufacturing, TU Vienna, September 2016
    Azvar, Milad and Budak, Erhan, "Multi-dimensional modelling of chatter stability in parallel turning operation", 17th International Conference on Machine Design and Production, Atilim University, July 2016
    Toprakhisar, Burak and Bakırcı, Ezgi and Koç, Bahattin, "3D bioprinting stem-cells with solubilized tendon extracellular matrix (ECM) based hydrogel", Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 460-460
    Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin, "Cell sheet as a bioink for 3D bioprinting", Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 461-461
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Modeling and measurement of cutting temperatures in milling", 7th CIRP Conference on High Performance Cutting (HPC 2016), Elsevier, June 2016, 173-176
    Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat, "Modeling and measurement of micro end mill dynamics using inverse stability approach", 7th CIRP Conference on High Performance Cutting (HPC 2016), Elsevier, June 2016, 242-245
    Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan, "Dik kesme modelinde üçüncü deformasyon bölgesi kuvvetlerinin termomekanik modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H., "Frezeleme esnasındaki tezgâh dinamiğinin belirlenmesi ve modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa, "Mikro frezeleme işleminde yüzey oluşumunun modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan, "Yüksek hızlı iş millerinin termal modellemesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Boz, Talha and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Bayburtlu, Caner and Köprübaşı, Kerem, "Diesel engine NOx emission modeling with airpath input channels", 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015), USA: IEEE Industrial Electronics Society, November 2015
    Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, "Vision based cone angle estimation of bubbly cavitating flow and analysis of scattered bubbles using micro imaging techniques", 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015), USA: IEEE Industrial Electronics Society, November 2015
    Putz, M. and Ihlenfeldt, S. and Karagüzel, U. and Semmler, U. and Budak, Erhan and Bakkal, Mustafa and Wertheim, R., "Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement", Holger, Kohl and Seliger, Gunter and Mallon, Jurgen (eds.), 13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, Amsterdam: Elsevier, September 2015
    Efe, Mehmet Önder and Ünel, Mustafa and Erbatur, Kemalettin and Kaynak, Ünver and Leblebicioğlu, Kemal, "İnsansız hava aracı projeleri ve kaynak sağlayan programlar üzerine (On UAV projects and funding agencies)", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı (TOK 2015), Pamukkale, Denizli: TOK (Otomatik Kontrol Türk Milli Komitesi), September 2015, 192-199
    Tofighi, Nima and Özbulut, Murat and Yıldız, Mehmet, "Deformation of a droplet in couette flow subject to an external electric field simulated using ISPH", Onate, E. and Bischoff, M. and Owen, D. R. J. and Wriggers, P. and Zohdi, T. (eds.), IV International Conference on Particle-Based Methods: Fundamentals and Applications, Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering), September 2015
    Yıldız, Yıldıray and Ünel, Mustafa and Demirel, Ahmet Eren, "Adaptive nonlinear hierarchical control of a quad tilt-wing UAV", European Control Conference (ECC 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2015, 3623-3628
    Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa, " Experimental investigation of tool wear in micro milling", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan, "An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Albayrak, Mehmet and Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan, "Static and dynamic analysis of different machine tool spindles", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet, "ISPH simulation of the motion of elliptic particles under external electric field", 10th International Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) Workshop, UK: SPHERIC (Smoothed Particle Hydrodynamics European Research Interest Community), June 2015
    Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Cutting temperature and tool wear in turn-milling", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Çelebi, Ceren and Özlü, Emre and Budak, Erhan, "Experimental and analytical investigation of third deformation zone in orthogonal cutting", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan, "Thermo-mechanical modeling of cutting forces in micro endmilling operations", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet, "Migration of a rigid disc in couette flow subject to an external electric field simulated using ISPH", Schrefler, Bernhard A. and Oñate, Eugenio and Papadrakakis, Manolis (eds.), 6th International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS), Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering), May 2015, 725-733
    Özbulut, Murat and Tofighi, Nima and Gören, Ömer and Yıldız, Mehmet, "On the SPH modelling of flow over cylinder beneath to a free-surface", VI International Conference on Computational Methods in Marine Engineering (Marine 2015), Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering) 2015
    Özbulut, Murat and Tofighi, Nima and Yıldız, Mehmet and Gören, Ömer, "Sph modelling of long-term sway-sloshing motion in a rectangular tank", The Twenty-fifth International Offshore and Polar Engineering Conference, Richardson, Texas: International Society of Offshore and Polar Engineers 2015
    Üzüşen, Doğan and Oral, Özlem and Ekici, Sinan and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali, "Assessment of probe-to-specimen distance effect in kidney stone treatment with hydrodynamic cavitation", 4th European Conference on Microfluidics (Microfluidics 2014), Limerick, Ireland: University of Limerick, December 2014
    Üstündağ, Barış Can and Ünel, Mustafa, "Human action recognition using histograms of oriented optical flows from depth", Bebis, George and Boyle, Richard and Parvin, Bahram and Koracin, Darko and McMahan, Ryan and Jerald, Jason and Zhang, Hui and Drucker, Steven M. and Kambhamettu, Chandra and El Choubassi, Maha and Deng, Zhigang and Carlson, Mark (eds.), 10th International Symposium on Visual Computing (ISVC 2014), Switzerland: Springer International Publishing, November 2014, 629-638
    Aslan, Deniz and Kocaefe, Mert and Budak, Erhan, "Çevresel kanallı taşlar ile satıh taşlama operasyonunun modellenmesi (Modeling of surface grinding operation with circumferentially grooved wheels)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Universitesi, November 2014
    Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Dik frezeyle tornalama işleminde eksenler arası ofsetin etkisi ve takım ömrü (Tool life and the effect of axis offset in orthogonal turn-milling)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Universitesi, October 2014
    Hatipoğlu, Ersen and Budak, Erhan, "Mikro frezeleme işleminde kesme parametrelerinin yüzey ve talaş oluşumuna etkisinin deneysel olarak incelenmesi (Experimental investigation of cutting parameters effect on surface generation and burr formation in micro milling)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Universitesi, October 2014
    Baytok, Esma and Özlü, Emre and Budak, Erhan, "Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Üniversitesi, October 2014
    Yıldırım, Alper and Ünel, Mustafa, "Image mosaicing by camera pose estimation based on extended Kalman filter", Campilho, Aurelio and Kamel, Mohamed (eds.), 11th International Conference on Image Analysis and Recognition (ICIAR 2014), Switzerland: Springer International Publishing, October 2014, 450-457
    Demirel, Ahmet Eren and Ünel, Mustafa, "Prototip Bir ornithopterin modellenmesi, denetimi ve benzetimi", Bingül, Zafer (ed.), 2014 Otomatik Kontrol Ulusal Toplantısı (TOK 2014), Kocaeli, Türkiye: Kocaeli Üniversitesi, September 2014, 108-113
    Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet, "Numerical investigation of electrically excited RTI using ISPH method", Onate, E. and Oliver, J. and Huerta, A. (eds.), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain: ECCOMAS, July 2014
    Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Investigating eccentricity effects in turn-milling operations", 6th CIRP International Conference on High Performance Cutting (HPC2014), Amsterdam, Netherlands: Elsevier, June 2014, 176-181
    Aslan, Deniz and Budak, Erhan, "Semi-analytical force model for grinding operations", 6th CIRP International Conference on High Performance Cutting (HPC2014), Amsterdam, Netherlands: Elsevier, June 2014, 7-12
    Koç, Bahattin and Özler, Saime Burçe and Küçükgül, Can and Altunbek, Mine and Sen, O. and Çulha, M., "3D Bioprinting of aortic structures with HDF cells", Termis EU 2014 Congress, Hoboken, NJ, USA: Wiley, June 2014, 391-392
    Koç, Bahattin and Küçükgül, Can and Özler, Saime Burçe and Altunbek, Mine and Sen, O. and Çulha, M., "3D Bioprinting of branched vessel constructs", Termis EU 2014 Congress, Hoboken, NJ, USA: Wiley, June 2014, 95-96
    Demircan, Özgür and Yılmaz, C. and Kocaman, E. S. and Akay, E. and Yıldız, Mehmet, "Tensile and bending properties of biaxial warp knitted textile composites", 1st Joint Turkey-Japan Workshop (JTJW) on Polymeric Composite Materials, Istanbul, Turkey: Sabanci University, May 2014
    Monfared Zanjani, Jamal Seyyed and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Fabrication and morphological investigation of multi-walled electrospun polymeric nanofibers", MRS Fall 2013 Meeting, Warrendale, PA, USA: Materials Research Society 2014
    Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa, "High performance turning of high temperature alloys on multi-tasking machine tools", Denkena, Berend (ed.), 4th Machining Innovations Conference, Switzerland: Springer 2014, 1-9
    Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan, "Chatter reduction in turning by using piezoelectric shunt circuits", Allemang, Randall and De Clerck, James and Niezrecki, Christopher and Wicks, Alfred (eds.), IMAC-XXXI Conference and Exposition on Structural Dynamics, New York: Springer 2014, 415-420
    Kekeç, İbrahim Taygun and Üstündağ, Barış Can and Güney, Mehmet Ali and Yıldırım, Alper and Ünel, Mustafa, "A modular software architecture for UAVs", 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2013, 4037-4042
    Ulun, Soner and Ünel, Mustafa, "Coordinated motion of UGVs and a UAV", 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2013, 4079-4084
    Şahin, Caner and Ünel, Mustafa, "Under vehicle perception for high level safety measures using a catadioptric camera system", 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2013, 4306-4311
    Güney, Mehmet Ali and Ünel, Mustafa, "Formation control of a group of micro aerial vehicles (MAVs)", IEEE International Conference on Systems, Man, and Cybernetics, USA: IEEE (Institute of Electrical and Electronics Engineers), October 2013
    Tofighi, Nima and Yıldız, Mehmet, "ISPH simulation of droplet spreading at different eotvos numbers", Simos, T. and Psihoyios, G. and Tsitouras, C. (eds.), 11th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM), Melville, NY, USA: AIP (American Institute of Physics), October 2013, 128-131
    Özden Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Atılgan, Canan, "Theoretical and experimental investigation of dual-scale roughness via electro-spraying", 246th National Meeting of the American-Chemical-Society (ACS), Washington, DC, USA: American Chemical Society, September 2013
    Chelliah, Pandian and Deniz, A. and Kuelen, C. and Bektaş, Gökhan and Boz, Talha and Melemez, Fazlı Fatih and Öztürk, Cem and Suleman, A. and Yıldız, Mehmet, "Simulation studies of spectral subtraction based temperature compensation of FBG sensor for structural health monitoring based on principal component analysis", 9th International Workshop on Structural Health Monitoring (IWSHM 2013), Stanford, CA: Stanford University, September 2013, 478-478
    Tofighi, Nima and Rahmat, Amin and Yıldız, Mehmet, "Numerical simulation of buoyancy driven droplet rising under influence of an electrical field using ISPH", III International Conference on Particle-Based Methods: Fundamentals and Applications (Particles 2013), Spain: ECCOMAS, September 2013
    Rahmat, Amin and Safdari Shadloo, Mostafa and Tofighi, Nima and Yıldız, Mehmet, "The simulation of the Rayleigh Taylor instability for high density ratios and infinity bond number with SPH method", III International Conference on Particle-Based Methods: Fundamentals and Applications (Particles 2013), Spain: ECCOMAS, September 2013
    Üstündağ, Barış Can and Kekeç, İbrahim Taygun and Güney, Mehmet Ali and Mundt, Pamir and Ünel, Mustafa, "İnsansız hava araçları için donanımdan bağımsız yazılım sistemi geliştirilmesi", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı 2013 (TOK 2013), Malatya, Türkiye: İnönü Üniversitesi, September 2013, 605-610
    Evren, Sanem and Ünel, Mustafa, "Sürü robotlarının serbest şekilli formasyon denetimi", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı 2013 (TOK 2013), Malatya, Türkiye: İnönü Üniversitesi, September 2013, 954-960
    Şahin, Caner and Ünel, Mustafa, "Tüm yönlü kamera kullanan bir mobil robot ile araç altı görüntüleme sistemi", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı 2013 (TOK 2013), Malatya, Türkiye: İnönü Üniversitesi, September 2013, 936-941
    Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk, "Modeling and control of a variable speed variable pitch angle prototype wind turbine", 4th International Conference on Mathematical and Computational Applications (ICMCA 2013), Manisa, Turkey: Association for Scientific Research, June 2013
    Küçükgül, Can and Özler, Saime Burçe and Karakaş, Hacer Ezgi and Gözüaçık, Devrim and Koç, Bahattin, "3D hybrid bioprinting of macrovascular structures", Bártolo, Paulo and Fernandes, Paulo (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE 2013), The Netherlands: Elsevier, June 2013, 183-192
    Tofighi, Nima and Yıldız, Mehmet, "Incompressible smoothed particle hydrodynamics simulation of three phase flows", 21st Annual Conference of the CFD Society of Canada, Sherbrooke, Canada: CFD Society of Canada, May 2013
    Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, "Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138
    Baytok, Esma and Tuna, Başak and Toprak, Ayhan and Özlü, Emre and Budak, Erhan, "Freze ve delik delme işlemlerinde kullanılan karbür takımların sistematik olarak performans karşılaştırması (Performance comparison of milling and drilling carbide tools)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 185-201
    Nizamoğulları, A. and Çomak, Alptunç and Budak, Erhan, "Paralel tornalama işlevini gerçekleştiren CNC torna tezgahının tasarımı, kesici uç ömrü ve kesme kararlılığı incelemeleri (Cutting tool life, cutting stability and process time review on designed and manufactured CNC turning machine which performs the parallel turning function)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 339-357
    Aslan, Deniz and Budak, Erhan, "Satıh taşlama operasyonunda kuvvet ve sıcaklık modellemesi (Force and temperature modeling for surface grinding operation)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 359-373
    Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat, "Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics)", Şakar, Gürkan (ed.), 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey: Ataturk University 2013, 114-124
    Yasa, E. and Orhangül, A. and Songüler, S. C. and Platin, S. and Baytok, E. and Özlü, E. and Tunç, T. and Budak, Erhan, "Assessment of machinability performance in 5-axis milling of inconel 718 alloy with different carbide grades", 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, -: Machines and Dies / Molds 2013
    Olgun, Utku and Budak, Erhan, "Machining of difficult-to-cut-alloys using rotary turning tools", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 81-87
    Çelebi, Ceren and Özlü, E. and Budak, Erhan, "Modeling and experimental investigation of edge hone and flank contact effects in metal cutting", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 194-199
    Çomak, A. and Koca, R. and Özkırımlı, Ö. M. and Budak, Erhan, "Modeling and simulation based design of variable pitch and variable helix milling tools for increased chatter stability", 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, -: Machines and Dies / Molds 2013
    Koca, Recep and Budak, Erhan, "Optimization of serrated end mills for reduced cutting energy and higher stability", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 570-575
    Khoda, AKM Bashirul and Özbolat, İbrahim T. and Koç, Bahattin, "Spatially multi-functional porous tissue scaffold", Bartolo, P. and Fernandes, P. (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE), Amsterdam, Netherlands: Elsevier 2013, 174-182
    Khoda, AKM Bashirul and Özbolat, İbrahim T. and Koç, Bahattin, "Functionally gradient tissue scaffold design and deposition path planning for bio-additive processes", 2013 Industrial and Systems Engineering Research Conference, Norcross, GA: IIE (Institute of Industrial Engineers) 2013
    Melemez, Fazlı Fatih and Boz, Talha and Chelliah, Pandian and Bektaş, Gökhan and Yıldız, Mehmet and Öztürk, Cem and Menceloğlu, Yusuf Z., "Study of local and transient buckling in glass fiber reinforced composite using fiber bragg grating", Hristoforou, E. and Vlachos, D. S. (eds.), 2nd International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Zurich, Switzerland: Trans Tech Publications 2013, 346-351