Pashmforoush, Farzad and Ebrahimi Araghizad, Arash and Budak, Erhan (2024) "Physics-informed tool wear prediction in turning process: a thermo-mechanical wear-included force model integrated with machine learning", Journal of Manufacturing Systems, Vol.77, 266-283 (SCI)

Birgün, Nihan and Güçlü, Serkan and Menceloğlu, Yusuf Z. and Ünal, Serkan and Erkoç İlter, Selda (2024) "High flux cellulose acetate / tert-butyl cyclopolymer composite membranes for desalination: Permeability-enhancer channels by bulky and amorphous cyclopolymers", Journal of Environmental Chemical Engineering, Vol.12, No.6 (SCI)

Kheyabani, Aryan and Kefal, Adnan (2024) "Integrating parametric HFGMC and isogeometric RZT{3,2} for multiscale damage modeling of composite structures: a numerical and experimental study", Thin-Walled Structures, Vol.204 (SCI)

Mumcuoğlu, Mehmet Emin and Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Mise, Serdar and Unsal, Simge and Cevik, Enes and Yilmaz, Metin and Koprubasi, Kerem (2024) "Detecting APS failures using LSTM-AE and anomaly transformer enhanced with human expert analysis", Engineering Failure Analysis, Vol.165 (SCI)

Nejatpour, Mona and Fallah, Ali and Koç, Bahattin (2024) "An overview of 4D printing of smart multifunction continuous fiber-reinforced composites: recent advances and novel applications", Advanced Composites and Hybrid Materials, Vol.7, No.5 (SCI)

Zemzemoğlu, Muhammed and Ünel, Mustafa and Tunç, Lütfi Taner (2024) "Enhancing automated fiber placement process monitoring and quality inspection: a hybrid thermal vision based framework", Composites Part B: Engineering, Vol.285 (SCI)

Arıtürk, Gizem Semra and Bilge, Kaan and Girişken, Çağla and Seven, Senem Avaz and Menceloğlu, Yusuf Z. (2024) "A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites". Published Online First https://dx.doi.org/10.1002/pen.26937

Hasim, K. A. and Kefal, Adnan (2024) "Free and forced vibration analysis of piezolaminated plates via an isogeometric layerwise finite element". Published Online First https://dx.doi.org/10.1080/15376494.2024.2400716

Javidrad, Hamidreza and Aydin, Huseyin and Karakaş, Burak and Alptekin, Sertaç and Kahraman, Aylin Sahin and Koç, Bahattin (2024) "Process parameter optimization for laser powder directed energy deposition of Inconel 738LC", Optics and Laser Technology, Vol.176 (SCI)

Kölgesiz, Sarp and Tas, Cuneyt Erdinc and Şişman, Neslihan and Ünal, Serkan and Ünal, Hayriye (2024) "Flexible and inherently photothermal waterborne polydopamine/polyurethane/phase change material foams for light-to-thermal energy conversion and thermal energy storage", Industrial and Engineering Chemistry Research, Vol.63, No.35, 15485-15498 (SCI)

Uçar, Cuma Ali and Dızman, Bekir (2024) "Synthesis and characterization of 1-(3-aminopropyl)imidazole-phenyl isocyanate adduct and its application as a thermal latent curing agent for diglycidylether bisphenol A resin", ACS Omega, Vol.9, No.33, 35579-35588 (SCI)

Tunç, Lütfi Taner and Gulmez, Deniz Arda (2024) "Tool path strategies for efficient milling of thin-wall features", Journal of Manufacturing and Materials Processing, Vol.8, No.4 (ESCI)

Basaran, Mustafa and Turkmen, Halit Suleyman and Yıldız, Mehmet (2024) "Sensor-enhanced thick laminated composite beams: manufacturing, testing, and numerical analysis", Sensors, Vol.24, No.16 (SCI)

Shinba, Yuta and Irino, Naruhiro and Imabeppu, Yasuhiro and Budak, Erhan and Suzuki, Norikazu and Kishimoto, Atsuo (2024) "Improvement of surface quality in simultaneous machining of multiple workpieces on a single machine", CIRP Annals, Vol.73, No.1, 305-308 (SCI)

Yahyapour, Ramisa and Başkan Bayrak, Havva and Yagcı, Yavuz Emre and Saner Okan, Burcu (2024) "Co-reinforcing sustainable graphenes from thermoset/thermoplastic wastes for enhanced polypropylene matrix composites in automotive engineering". Published Online First https://dx.doi.org/10.1002/pc.28760

Belur, Muhammed Yavuz and Kefal, Adnan and Abdollahzadeh, Mohammad Amin and Fassois, Spilios D. (2024) "Damage diagnosis of plates and shells through modal parameters reconstruction using inverse finite-element method". Published Online First https://dx.doi.org/10.1177/14759217241249678

Özyiğit, Samet and Mehdipour Aghbolagh, Mostafa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Tabrizi, Arvin T. and Doğan, Semih and Dericiler, Kuray and Beylergil, Bertan and Yıldız, Mehmet and Saner Okan, Burcu (2024) "A comprehensive experimental study on the effects of hexagonal boron nitride particle size and loading ratio on thermal and mechanical performance in epoxy composites", Journal of Composite Materials, Vol.58, No.13 (SCI)

Barzegar Osgouei, Ali and Karimi, Sasan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2024) "Enhancing interlaminar bonding quality estimation in laser-assisted fiber placement of CF/PEKK composites: a correction factor approach for improved prediction of intimate contact", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)

Yousefimiab, Elham and Basoglu, M. F. and Kefal, Adnan (2024) "Peridynamic analysis of thermomechanical effects in fracture toughening mechanisms of stop holes", Engineering Fracture Mechanics, Vol.301 (SCI)

Dericiler, Kuray and Saner Okan, Burcu (2024) "A comprehensive dimensional analysis of waste-derived reinforcements in interface interactions with semi-bio-based PA6,10 composites", Polymer Composites, Vol.45, No.7, 6467-6481 (SCI)

Yıldırım, Ceren and Ulus, Hasan and Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Topal, Serra and Yıldız, Mehmet (2024) "Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: comparative analysis of atmospheric plasma activation and conventional treatments", Composites Part A: Applied Science and Manufacturing, Vol.180 (SCI)

Daskalakis, Evangelos and Huang, Boyang and Hassan, Mohamed H. and Omar, Abdalla M. and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2024) "In vitro evaluation of pore size graded bone scaffolds with different material composition", 3D Printing and Additive Manufacturing, Vol.11, No.2, E718-E730 (SCI)

Şahin Dündar, Gülayşe and Saner Okan, Burcu (2024) "Utilizing upcycled graphene nanoplatelet-coated glass fibers as a performance booster and compatibilizer for enhanced mechanical performance of polypropylene/glass fiber/graphene nanoplatelet composites", ACS Omega, Vol.9, No.15, 17432-17445 (SCI)

Durmuş Sayar, Ayşe and Tansan, Murat and Çinko Çoban, Tuğçe and Serttan, Dilay and Dızman, Bekir and Yıldız, Mehmet and Ünal, Serkan (2024) "Incorporation of graphene nanoplatelets into fiber-reinforced polymer composites in the presence of highly branched waterborne polyurethanes", Polymers, Vol.16, No.6 (SCI)

Zoghipour, Pouya and Kefal, Adnan and Yıldız, Mehmet (2024) "Structural analysis of sandwich plates with variable stiffness composite skins and functionally graded cores using refined zig-zag theory". Published Online First https://dx.doi.org/10.1080/15376494.2024.2323098

Ozalp, A. and Okuyucu, C. and Koç, Bahattin and El-Atwani, O. and Aydogan, E. (2024) "Development and directed energy deposition of high strength Hf5Mo15Nb35Ta25Ti20 refractory high entropy alloys", Materials Characterization, Vol.209 (SCI)

Joudivand Sarand, Mohammad Hasan and Mısırlıoğlu, Burç (2024) "A physics-based plasticity study of the mechanism of inhomogeneous strain evolution in dual phase 600 steel", International Journal of Plasticity, Vol.174 (SCI)

Abdali, Amirreza and Hossein Nedjad, Syamak and Hamed Zargari, Habib and Saboori, Abdollah and Yıldız, Mehmet (2024) "Predictive tools for the cooling rate-dependent microstructure evolution of AISI 316L stainless steel in additive manufacturing", Journal of Materials Research and Technology, Vol.29, 5530-5538 (SCI)

Sheikhi, Mohammad and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Tunç, Lütfi Taner (2024) "Design of manufacturable variable stiffness composite laminates using spectral Chebyshev and normalized cut segmentation methods", Composite Structures, Vol.330 (SCI)

Başkan Bayrak, Havva and Kocanali, Atakan and Saner Okan, Burcu (2024) "Selective thermal recycling for graphene growth on natural substrates: a comparative study on life cycle assessment, energy consumption, and mechanical performance in recompounding", Journal of Applied Polymer Science, Vol.141, No.7 (SCI)

Jamshidi, Hamid and Budak, Erhan (2024) "A digital twin-based framework for selection of grinding conditions towards improved productivity and part quality", Journal of Intelligent Manufacturing, Vol.35, No.1, 161-173 (SCI)

Kömürcü, Emre and Kefal, Adnan and Abdollahzadeh, M. A. and Basoglu, M. F. and Kısa, Erdal and Yıldız, Mehmet (2024) "Towards composite suspension control arm: conceptual design, structural analysis, laminate optimization, manufacturing, and experimental testing", Composite Structures, Vol.327 (SCI)

Yıldız, Gülşah and Arslan, Yavuz Emre and Derkus, Burak and Sezgin, Billur and Menceloğlu, Yusuf Z. and Bayar, Gurkan Rasit (2024) "Development and characterization of skin substitutes from electrospun polycaprolactone/silk fibroin", Journal of Bioactive and Compatible Polymers, Vol.39, No.1, 46-62 (SCI)

Vakilha, M. and Saghatchi, Roozbeh and Alexiadis, A. and Yıldız, Mehmet and Shadloo, M. S. (2024) "A fully explicit incompressible smoothed particle hydrodynamics approach for modeling transient heat transfer and thermo-capillary flows", Computers and Fluids, Vol.269 (SCI)

Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) "Smart tool-related faults monitoring system using process simulation-based machine learning algorithms", Journal of Machine Engineering, Vol.23, No.4, 18-32 (NA)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Revolutionizing transportation composite structures: lightweight, sustainable, and multi-scale hybrid design through waste tire-driven graphene, hemp fiber, and bio-based overmoulding". Published Online First https://dx.doi.org/10.1177/08927057231222821

Al-Nadhari, Abdulrahman Saeed Abdulqader and Şenol, Halil and Topal, Serra and Ulus, Hasan and Yıldız, Mehmet (2023) "The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings", Composites Part A: Applied Science and Manufacturing, Vol.175 (SCI)

Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Ünal, Serkan and Dızman, Bekir (2023) "Amphiphilic polyoxazoline copolymer-imidazole complexes as tailorable thermal latent curing agents for one-component epoxy resins", ACS Omega, Vol.8, No.49, 47173-47186 (SCI)

Işık, Murat and Yıldız, Mehmet and Seçer, Ragıp Orkun and Sen, Ceren and Bilgin, Guney Mert and Orhangul, Akin and Akbulut, Guray and Javidrad, Hamidreza and Koç, Bahattin (2023) "Fabrication of electron beam melted titanium aluminide: the effects of machining parameters and heat treatment on surface roughness and hardness", Metals, Vol.13, No.12 (SCI)

Zarrabi, Ali and Perrin, David and Kavoosi, Mahboubeh and Sommer, Micah and Sezen, Serap and Mehrbod, Parvaneh and Bhushan, Bhavya and Machaj, Filip and Rosik, Jakub and Kawalec, Philip and Afifi, Saba and Bolandi, Seyed Mohammadreza and Koleini, Peiman and Taheri, Mohsen and Madrakian, Tayyebeh and Łos, Marek J. and Lindsey, Benjamin and Çakır, Nilüfer and Zarepour, Atefeh and Hushmandi, Kiavash and Fallah, Ali and Koç, Bahattin and Khosravi, Arezoo and Ahmadi, Mazaher and Logue, Susan and Orive, Gorka and Pecic, Stevan and Gordon, Joseph W. and Ghavami, Saeid (2023) "Rhabdomyosarcoma: current therapy, challenges, and future approaches to treatment strategies", Cancers, Vol.15, No.21 (SCI)

Ranjbar Aghjehkohal, Amin and Taghizadeh Tabrizi, Arvin and Yıldız, Mehmet (2023) "Electrochemical hydrogen storage of synthesized heterostructure of hexagonal boron nitride-carbon nano tube", Journal of Alloys and Compounds, Vol.962 (SCI)

Çelik, Dilara and Karaca, Ali and Koç, Bahattin (2023) "Directed energy deposition of parts with internal channels using removable graphite supports". Published Online First https://dx.doi.org/10.1089/3dp.2023.0057

Dericiler, Kuray and Hezarkhani, Marjan and Emami Tabrizi, Isa and Doğan, Semih and Berktaş, İlayda and Erdem, Emre and Advani, Suresh G. and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "Effect of interleaved electrolyte forms on macro-scaled structural hybrid supercapacitors with asymmetric configurations of graphene-coated carbon fabric electrodes", Applied Composite Materials, Vol.30, No.5, 1435-1451 (SCI)

Ganjdoust, Faraz and Kefal, Adnan and Tessler, Alexander (2023) "Delamination detection and localization in vibrating composite plates and shells using the inverse finite element method", Sensors, Vol.23, No.18 (SCI)

Yalçınkaya, Esra and Başkan Bayrak, Havva and Saner Okan, Burcu (2023) "Growing of 2D/3D graphene structures on natural substrates from aromatic plastic wastes by scalable thermal-based upcycling process with a comparative CO2 footprint analysis", Sustainable Materials and Technologies, Vol.37 (SCI)

Karimzadehkhoei, Jalal and Sorayani Bafqi, Mohammad Sajad and Saeidiharzand, Shaghayegh and Mohammadilooey, Mandana and Hezarkhani, Marjan and Saner Okan, Burcu and Koşar, Ali and Sadaghiani, Abdolali (2023) "Upcycled graphene integrated fiber-based photothermal hybrid nanocomposites for solar-driven interfacial water evaporation", Desalination, Vol.562 (SCI)

Dericiler, Kuray and Zafar, Salman and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2023) "The effect of reinforcement aspect ratio on the performance of PA66 composites with recycled carbon fiber and upcycled graphene nanoplatelets: an interface characterization from process to modeling", Journal of Applied Polymer Science, Vol.140, No.35 (SCI)

Bilici, Çiğdem and Altunbek, Mine and Afghah, Ferdows and Tatar, Asena Gülenay and Koç, Bahattin (2023) "Embedded 3D printing of cryogel-based scaffolds", ACS Biomaterials Science and Engineering, Vol.9, No.8, 5028-5038 (SCI)

Şükür, Emine Feyza and Elmas, Sinem Gül and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem and Yıldız, Mehmet (2023) "An experimental implication of long-term hot-wet-aged carbon fiber/polyether ketone ketone composites: the impact of automated fiber placement process parameters and process-induced defects", Journal of Applied Polymer Science, Vol.140, No.29 (SCI)

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2023) "A general model for uncut chip geometry, process kinematics, and mechanics of orthogonal turn-milling process", CIRP Journal of Manufacturing Science and Technology, Vol.43, 57-70 (SCI)

Ali, Hafiz Qasim and Kheyabani, Aryan and Akalın, Cagdas and Kefal, Adnan and Yıldız, Mehmet (2023) "Numerical and experimental methodologies to investigate the damage progression inside the axisymmetric composite cylinders with cutouts under torsion", Composite Structures, Vol.315 (SCI)

Tunç, Lütfi Taner and Sheikhi, Mohammad (2023) "AFP tool path planning for manufacture of variable stiffness composites", CIRP Annals, Vol.72, No.1, 381-384 (SCI)

Batyrow, Merdan and Dericiler, Kuray and Palabiyik, Büşra Akkoca and Saner Okan, Burcu and Öztürk, Hande and Erucar, İlknur (2023) "Combining tensile test results with atomistic predictions of elastic modulus of graphene/polyamide-6,6 nanocomposites", Materials Today Communications, Vol.35 (SCI)

Khan, Raja Muhammad Awais and Shafighfard, Torkan and Ali, Hafiz Qasim and Mieloszyk, Magdalena and Yıldız, Mehmet (2023) "Strength prediction and experimental damage investigations of plain woven CFRPs with interacting holes using multi-instrument measurements", Polymer Composites, Vol.44, No.6, 3594-3609 (SCI)

Weng, Jian and Saelzer, Jannis and Berger, Sebastian and Zhuang, Kejia and Bagherzadeh, Amin and Budak, Erhan and Biermann, Dirk (2023) "Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties", Journal of Materials Processing Technology, Vol.314 (SCI)

Beylergil, Bertan and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2023) "Optimization of Charpy-impact strength of 3D-printed carbon fiber/polyamide composites by Taguchi method", Polymer Composites, Vol.44, No.5, 2846-2859 (SCI)

Ghasemzadeh, Maryam and Mokhtari, Mojtaba and Bilgin, Mahmut Hüdayi and Kefal, Adnan (2023) "Pitting corrosion identification approach based on inverse finite element method for marine structure applications", Ocean Engineering, Vol.273 (SCI)

Tunioli, Francesca and Khaliha, Sara and Mantovani, Sebastiano and Bianchi, Antonio and Kovtun, Alessandro and Xia, Zhenyuan and Sorayani Bafqi, Mohammad Sajad and Saner Okan, Burcu and Marforio, Tainah Dorina and Calvaresi, Matteo and Palermo, Vincenzo and Navacchia, Maria Luisa and Melucci, Manuela (2023) "Adsorption of emerging contaminants by graphene related materials and their alginate composite hydrogels", Journal of Environmental Chemical Engineering, Vol.11, No.2 (SCI)

Eryildiz, Bahriye and Ozbey-Unal, Bahar and Menceloğlu, Yusuf Z. and Keskinler, Bülent and Koyuncu, İsmail (2023) "Development of robust superhydrophobic PFA/TMI/PVDF membrane by electrospinning/electrospraying techniques for air gap membrane distillation", Journal of Applied Polymer Science, Vol.140, No.12 (SCI)

Çetiner, Büşra and Şahin Dündar, Gülayşe and Yusufoğlu, Yusuf and Saner Okan, Burcu (2023) "Sustainable engineered design and scalable manufacturing of upcycled graphene reinforced polylactic acid/polyurethane blend composites having shape memory behavior", Polymers, Vol.15, No.5 (SCI)

Daskalakis, Evangelos and Hassan, Mohamed H. and Omar, Abdalla M. and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2023) "Accelerated degradation of poly-ε-caprolactone composite scaffolds for large bone defects", Polymers, Vol.15, No.3 (SCI)

Zoghipour, Pouya and Hasim, K. A. and Kefal, Adnan and Yıldız, Mehmet (2023) "Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers", Composite Structures, Vol.305 (SCI)

Yoğurtçuoğlu, Abdul Vahap and Şimşek, Uğur and Koç, Bahattin (2023) "Effects of design parameters on surface roughness of additively manufactured thin-walled structures", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)

Topal, Serra and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldırım, Ceren and Beylergil, Bertan and Kan, Cihan and Ünal, Serkan and Yıldız, Mehmet (2023) "Multiscale nano-integration in the scarf-bonded patches for enhancing the performance of the repaired secondary load-bearing aircraft composite structures", Carbon, Vol.204, 112-125 (SCI)

Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2023) "Volumetric effects in electrocaloric response of ferroelectric thin films", Journal of Materials Chemistry C, Vol.11, No.3, 1134-1143 (SCI)

Saghatchi, Roozbeh and Kolukısa, Deniz Can and Yıldız, Mehmet (2023) "Development of smoothed particle hydrodynamics method for modeling active nematics", International Journal for Numerical Methods in Engineering, Vol.124, No.1, 159-182 (SCI)

Şahin Dündar, Gülayşe and Saner Okan, Burcu (2023) "An efficient interface model to develop scalable methodology of melt processing of polypropylene with graphene oxide produced by an improved and eco-friendly electrochemical exfoliation", Journal of Applied Polymer Science, Vol.140, No.2 (SCI)

Al-dulaimi, Wael Ali Saeed and Okatan, M. B. and Şendur, Kürşat and Onbasli, M. C. and Mısırlıoğlu, Burç (2023) "Size driven barrier to chirality reversal in electric control of magnetic vortices in ferromagnetic nanodiscs", Nanoscale, Vol.15, No.2, 707-717 (SCI)

Nedjad, Syamak Hossein and Yıldız, Mehmet and Saboori, Abdollah (2023) "Solidification behaviour of austenitic stainless steels during welding and directed energy deposition", Science and Technology of Welding and Joining, Vol.28, No.1, 1-17 (SCI)

Ghasemzadeh, Maryam and Kefal, Adnan (2022) "Sensor placement optimization for shape sensing of plates and shells using genetic algorithm and inverse finite element method", Sensors, Vol.22, No.23 (SCI)

Girişken, Çağla and Avaz, Merve Senem and Ersoy, Osman Gökhan and Menceloğlu, Yusuf Z. (2022) "Development and performance evaluation of cool black surface on thermoplastic polyolefins via incorporation of non-near infrared absorptive pigments", Journal of Applied Polymer Science, Vol.139, No.44 (SCI)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "Effects of meso- and micro-scale defects on hygrothermal aging behavior of glass fiber reinforced composites", Polymer Composites, Vol.43, No.11, 8396-8408 (SCI)

Fallah, Ali and Altunbek, Mine and Bartolo, Paulo and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin (2022) "3D printed scaffold design for bone defects with improved mechanical and biological properties", Journal of the Mechanical Behavior of Biomedical Materials, Vol.134 (SCI)

Başoğlu, Muhammed Fatih and Kefal, Adnan and Zerin, Zihni and Oterkus, Erkan (2022) "Peridynamic modeling of toughening enhancement in unidirectional fiber-reinforced composites with micro-cracks", Composite Structures, Vol.297 (SCI)

Malgueiro, Regina and Durães, Nelson and Teixiera, Paulo and Cunha, Américo and Valério, Rita and Peliteiro, Bruno and Kızıldağ, Nuray and Ünal, Serkan and Güçlü, Serkan (2022) "Functional fibers based on recycled PP from home textiles", Chemical Fibers International, Vol.72, No.3, 127-129 (NA)

Budak, Erhan and Matsubara, Atsushi and Donmez, Alkan and Munoa, Jokin (2022) "Mechanical interfaces in machine tools", CIRP Annals, Vol.71, No.2, 647-670 (SCI)

Bartolo, Paulo and Malshe, Ajay and Ferraris, Eleonora and Koç, Bahattin (2022) "3D bioprinting: materials, processes, and applications", CIRP Annals, Vol.71, No.2, 577-597 (SCI)

Yıldırım, Ferhat and Kabakçı, Elif and Şaş Çaycı, Hatice Sinem and Eskizeybek, Volkan (2022) "Multi-walled carbon nanotube grafted 3D spacer multi-scale composites for electromagnetic interference shielding", Polymer Composites, Vol.43, No.8, 5690-5703 (SCI)

Şükür, Emine Feyza and Elmas, Sinem and Seyednourani, Mahsa and Eskizeybek, Volkan and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A rational study on the hydrothermal aging of AFP manufactured CF/polyetherketoneketone composites with in situ consolidation supported by acoustic emission inspection", Journal of Applied Polymer Science, Vol.139, No.29 (SCI)

Bagherzadeh, Amin and Koç, Bahattin and Budak, Erhan and Işık, Murat (2022) "High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods", Virtual and Physical Prototyping, Vol.17, No.3, 419-436 (SCI)

Şahin, Zeynep Munteha and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Yıldız, Mehmet and Ünal, Serkan and Dızman, Bekir (2022) "Polyoxazoline-modified graphene oxides with improved water and epoxy resin dispersibility and stability towards composite applications", Journal of Applied Polymer Science, Vol.139, No.25 (SCI)

Rahimzadeh Berenji, Kaveh and Budak, Erhan (2022) "Improved machining performance through turn-milling", Journal of Machine Engineering, Vol.22, No.2, 5-17 (NA)

Menceloğlu, Yeşim and Menceloğlu, Yusuf Z. and Seven, Senem Avaz (2022) "Triblock superabsorbent polymer nanocomposites with enhanced water retention capacities and rheological characteristics", ACS Omega, Vol.7, No.24, 20486-20494 (SCI)

Alkan Taş, Buket and Berksun, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Ünal, Hayriye (2022) "Lysostaphin-functionalized waterborne polyurethane/polydopamine coatings effective against S. aureus biofilms", ACS Applied Polymer Materials, Vol.4, No.6, 4298-4305 (SCI)

Bilgili, Deniz and Budak, Erhan and Altintas, Yusuf (2022) "Multibody dynamic modeling of five-axis machine tools with improved efficiency", Mechanical Systems and Signal Processing, Vol.171 (SCI)

Celep, M. and Hadjadj, A. and Shadloo, M. S. and Sharma, S. and Yıldız, Mehmet and Kloker, M. J. (2022) "Effect of streak employing control of oblique-breakdown in a supersonic boundary layer with weak wall heating/cooling", Physical Review Fluids, Vol.7, No.5 (SCI)

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet (2022) "Damage growth and failure detection in hybrid fiber composites using experimental in-situ optical strain measurements and smoothing element analysis", International Journal of Damage Mechanics, Vol.31, No.4, 479-507 (SCI)

Demir, Eralp and Şaş Çaycı, Hatice Sinem and Işık, Murat and Gungor, Eda Aydogan and Davut, Kemal (2022) "A numerical methodology for monitoring stress distributions and experimental proof of the concept on metal embedded thin polymer-matrix composites using x-ray diffraction", Thin-Walled Structures, Vol.173 (SCI)

Kefal, Adnan and Diyaroğlu, Çağan and Yıldız, Mehmet and Oterkus, Erkan (2022) "Coupling of peridynamics and inverse finite element method for shape sensing and crack propagation monitoring of plate structures", Computer Methods in Applied Mechanics and Engineering, Vol.391 (SCI)

Aydogan, E. and El-Atwani, O. and Erdem, B. and Chen, W. Y. and Li, M. and Devaraj, A. and Koç, Bahattin and Maloy, S. A. (2022) "In-situ radiation response of additively manufactured modified Inconel 718 alloys", Additive Manufacturing, Vol.51 (SCI)

Guiton, Mélanie and Suárez-Montes, David and Sánchez, Rubén and Baustert, Paul and Soukoulis, Christos and Saner Okan, Burcu and Serchi, Tommaso and Cambier, Sébastien and Benetto, Enrico (2022) "Comparative life cycle assessment of a microalgae-based oil metal working fluid with its petroleum-based and vegetable-based counterparts", Journal of Cleaner Production, Vol.338 (SCI)

Sharabati, J. A.D. and Erkoç İlter, Selda and Güçlü, Serkan and Koseoglu-Imer, D. Y. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Ozturk, I. and Koyuncu, I. (2022) "Zwitterionic polysiloxane-polyamide hybrid active layer for high performance and chlorine resistant TFC desalination membranes", Separation and Purification Technology, Vol.282, No.Part A (SCI)

Rahimi, Mohammad Naqib and Kolukısa, Deniz Can and Yıldız, Mehmet and Ozbulut, Murat and Kefal, Adnan (2022) "A generalized hybrid smoothed particle hydrodynamics-peridynamics algorithm with a novel Lagrangian mapping for solution and failure analysis of fluid-structure interaction problems", Computer Methods in Applied Mechanics and Engineering, Vol.389 (SCI)

Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) "A novel vision-based calibration framework for industrial robotic manipulators", Robotics and Computer Integrated Manufacturing, Vol.73 (SCI)

Arıkan, Muhammed Hasan and Eroğlu, Fatih and Eskizeybek, Volkan and Şükür, Emine Feyza and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem (2022) "A systematic characterization approach for vacuum bag only prepregs towards an accurate process design", Materials, Vol.15, No.2 (SCI)

Dikyol, Caner and Altunbek, Mine and Bartolo, Paulo and Koç, Bahattin (2021) "Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues", Bioprinting, Vol.24 (NA)

Maleki-Ghaleh, Hossein and Hossein Siadati, M. and Fallah, Ali and Zarrabi, Ali and Afghah, Seyedeh Ferdows and Koç, Bahattin and Dalir Abdolahinia, Elaheh and Omidi, Yadollah and Barar, Jaleh and Akbari-Fakhrabadi, Ali and Beygi-Khosrowshahi, Younes and Adibkia, Khosro (2021) "Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering", Chemical Engineering Journal, Vol.426 (SCI)

Balkan, Muhammed Enes and Aydoğan, Eda and Işık, Murat and Derin, Bora and Koç, Bahattin (2021) "Directed energy deposition process development for functionally gradient Copper-Inconel 718 materials", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)

Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Akbulut, Güray (2021) "Topology optimization and manufacturing of engine bracket using electron beam melting", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)

Barak, Melike and Sheibani Aghdam, Araz and Seviniş, Emine Billur and Ünal, Serkan and Cebeci, Fevzi Çakmak (2021) "Layer-by-layer assembly of nanofilms from colloidally stable amine-functionalized silica nanoparticles", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.630 (SCI)

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2021) "Correction to: Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V (The International Journal of Advanced Manufacturing Technology, (2018), 95, 5-8, (1617-1634), 10.1007/s00170-017-1329-3)", International Journal of Advanced Manufacturing Technology, Vol.117, No.1-2, 689-690 (SCI)

De Sá Rodrigues, Francisco and Marques, Ricardo and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) "A new methodology for thermoelastic model identification in composite materials using digital image correlation", Optics and Lasers in Engineering, Vol.146 (SCI)

Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2021) "Embedded multimaterial bioprinting platform for biofabrication of biomimetic vascular structures", Journal of Materials Research (SI), Vol.36, No.19, 3851-3864 (SCI)

Ormanci-Acar, Turkan and Keskin, Basak and Korkut, Sevde and Mutlu-Salmanlı, Oyku and Turken, Turker and Koseoglu-Imer, Derya Y. and Demir, Tugba U. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, Ismail (2021) "Fabrication of halloysite nanotubes embedded thin film nanocomposite membranes for dye removal", Journal of Applied Polymer Science, Vol.138, No.38 (SCI)

Mohammadmoradi, Omid and Celik, Umit and Mısırlıoğlu, Burç and İnce, Gözde (2021) "Vapor phase synthesis of ferroelectric microislands on PVDF thin films", Nanotechnology, Vol.32, No.43 (SCI)

Aliyeva, Nargiz and Şaş Çaycı, Hatice Sinem and Saner Okan, Burcu (2021) "Recent developments on the overmolding process for the fabrication of thermoset and thermoplastic composites by the integration of nano/micron-scale reinforcements", Composites Part A: Applied Science and Manufacturing, Vol.149 (SCI)

Taş, Cüneyt Erdinç and Berksun, Ekin and Köken, Deniz and Kölgesiz, Sarp and Ünal, Serkan and Ünal, Hayriye (2021) "Waterborne polydopamine-polyurethane/polyethylene glycol-based phase change films for solar-to-thermal energy conversion and storage", Industrial and Engineering Chemistry Research, Vol.60, No.41, 14788-14800 (SCI)

Saghatchi, Roozbeh and Özbulut, Murat and Yıldız, Mehmet (2021) "Dynamics of double emulsion interfaces under the combined effects of electric field and shear flow", Computational Mechanics, Vol.68, No.4, 775-793 (SCI)

Maleki-Ghaleh, H. and Siadati, M. H. and Fallah, Ali and Koç, Bahattin and Kavanlouei, M. and Khademi-Azandehi, P. and Moradpur-Tari, E. and Omidi, Y. and Barar, J. and Beygi-Khosrowshahi, Y. and Kumar, Alan P. and Adibkia, Kh (2021) "Antibacterial and cellular behaviors of novel zinc-doped hydroxyapatite/graphene nanocomposite for bone tissue engineering", International Journal of Molecular Sciences, Vol.22, No.17 (SCI)

Lahe Mothlag, Peyman and Kefal, Adnan (2021) "Comparative study of peridynamics and finite element method for practical modeling of cracks in topology optimization", Symmetry, Vol.13, No.8 (SCI)

Khan, Raja Muhammad Awais and Saeidiharzand, Shaghayegh and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Yıldız, Mehmet (2021) "A novel hybrid damage monitoring approach to understand the correlation between size effect and failure behavior of twill CFRP laminates", Composite Structures, Vol.270 (SCI)

Jamshidi, Hamid and Budak, Erhan (2021) "On the prediction of surface burn and its thickness in grinding processes", CIRP Annals, Vol.70, No.1, 285-288 (SCI)

Tunç, Lütfi Taner and Gönül, Bora (2021) "Effect of quasi-static motion on the dynamics and stability of robotic milling", CIRP Annals, Vol.70, No.1, 305-308 (SCI)

Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) "Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces", International Journal of Advanced Manufacturing Technology, Vol.114, No.11-12, 3581-3596 (SCI)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) "An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions", International Journal of Mechanical Sciences, Vol.197 (SCI)

Oğuz, Oğuzhan and Candau, Nicolas and Stoclet, Gregory and Şimşek, Eren and Kosak Soz, Cagla and Yilgor, Emel and Yilgor, Iskender and Menceloğlu, Yusuf Z. (2021) "Geometric confinement controls stiffness, strength, extensibility, and toughness in poly(urethane-urea) copolymers", Macromolecules, Vol.54, No.10, 4704-4725 (SCI)

Erkoç İlter, Selda and Saffarimiandoab, Farzin and Güçlü, Serkan and Koseoglu-Imer, Derya Y. and Tunaboylu, Bahadir and Menceloğlu, Yusuf Z. and Koyuncu, Ismail and Ünal, Serkan (2021) "Surface modification of reverse osmosis desalination membranes with zwitterionic silane compounds for enhanced organic fouling resistance", Industrial and Engineering Chemistry Research, Vol.60, No.14, 5133-5144 (SCI)

Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) "Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy", Journal of Cleaner Production, Vol.289 (SCI)

Seyyed Monfared Zanjani, Jamal and Yousefi Louyeh, Pouya and Emami Tabrizi, Isa and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2021) "Thermo-responsive and shape-morphing CF/GF composite skin: full-field experimental measurement, theoretical prediction, and finite element analysis", Thin-Walled Structures, Vol.160 (SCI)

Kolukısa, Deniz Can and Özbulut, Murat and Yıldız, Mehmet (2021) "The effect of iterative procedures on the robustness and fidelity of augmented lagrangian SPH", Symmetry, Vol.13, No.3 (SCI)

Elcin, Cakal Sarac and Haghighi Poudeh, Leila and Berktaş, İlayda and Saner Okan, Burcu (2021) "Scalable fabrication of high-performance graphene/polyamide 66 nanocomposites with controllable surface chemistry by melt compounding", Journal of Applied Polymer Science, Vol.138, No.10 (SCI)

Karahan, Özlem and Tufani, Ali and Ünal, Serkan and Mısırlıoğlu, Burç and Menceloğlu, Yusuf Z. and Şendur, Kürşat (2021) "Synthesis and morphological control of vo2 nanostructures via a one-step hydrothermal method", Nanomaterials, Vol.11, No.3 (SCI)

Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) "Multi-material topology optimization of structures with discontinuities using peridynamics", Composite Structures, Vol.258 (SCI)

Tofighi, N. and Feng, J. J. and Yıldız, Mehmet and Suleman, A. (2021) "Long term sedimentation of an elliptic disc subject to an electrostatic field using smoothed particle hydrodynamics method", International Journal of Multiphase Flow, Vol.135 (SCI)

Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and Yıldız, Mehmet and Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021) "Simulation of pandemics in real cities: enhanced and accurate digital laboratories", Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.477, No.2245 (SCI)

Levanyuk, Arkady P. and Minyukov, Sergey A. and Mısırlıoğlu, Burç and Barış Okatan, M. (2021) "Effects of interphase boundaries in Ginzburg-Landau one-dimensional model of two-phase states in clamped systems", Journal of Applied Physics, Vol.129, No.4 (SCI)

Almasi, F. and Shadloo, M. S. and Hadjadj, A. and Özbulut, M. and Tofighi, Nima and Yıldız, Mehmet (2021) "Numerical simulations of multi-phase electro-hydrodynamics flows using a simple incompressible smoothed particle hydrodynamics method", Computers and Mathematics with Applications (SI), Vol.81, 772-785 (SCI)

Levanyuk, Arkady P. and Mısırlıoğlu, Burç and Baris Okatan, M. (2020) "Landau, Ginzburg, Devonshire and others", Ferroelectrics, Vol.569, No.1, 310-323 (SCI)

Altintas, Yusuf and Stepan, Gabor and Budak, Erhan and Schmitz, Tony and Kilic, Zekai Murat (2020) "Chatter stability of machining operations", Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.142, No.11 (SCI)

El Khaldi, Raed M. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Özdoğan, Reyhan and Çelebi, Mithat and Kaya, Mehmet A. and Koyuncu, İsmail (2020) "Application of high performance fo nanofibers based membrane for model and real seawater desalination", Desalination and Water Treatment, Vol.205, 53-62 (SCI)

Khan, Raja Muhammad Awais and Emami Tabrizi, Isa and Ali, Hafiz Qasim and Demir, Eralp and Yıldız, Mehmet (2020) "Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites", Polymer Testing, Vol.90 (SCI)

Sharani, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)

Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)

Sadaghiani, Abdolali Khalili and Rajabnia, Hossein and Çelik, Süleyman and Noh, H. and Kwak, H. J. and Nejatpour, Mona and Park, Hyun Sun and Acar, H. Y. and Mısırlıoğlu, Burç and Özdemir, Mehmed Rafet and Koşar, Ali (2020) "Pool boiling heat transfer of ferrofluids on structured hydrophilic and hydrophobic surfaces: the effect of magnetic field", International Journal of Thermal Sciences, Vol.155 (SCI)

Yüksel, Esra and Ertürk, Ahmet Semih and Budak, Erhan (2020) "A hybrid contact implementation framework for finite element analysis and topology optimization of machine tools", Journal of Manufacturing Science and Engineering, Vol.142, No.8 (SCI)

Acar, Türkan Ormancı and Taş, Cüneyt Erdinç and Keskin, Başak and Seviniş Özbulut, Emine Billur and Turken, Turker and İmer, Derya Yüksel and Tüfekçi, Neşe and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2020) "Thin-film composite nanofiltration membranes with high flux and dye rejection fabricated from disulfonated diamine monomer", Journal of Membrane Science, Vol.608 (SCI)

Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) "Broaching tool design through force modelling and process simulation", CIRP Annals - Manufacturing Technology, Vol.69, No.1, 53-56 (SCI)

Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) "A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements", Sensors, Vol.20, No.14 (SCI)

Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) "Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics", Composite Structures, Vol.244 (SCI)

Taş, Cüneyt Erdinç and Seviniş Özbulut, Emine Billur and Çeven, Ömer Faruk and Alkan Taş, Buket and Ünal, Serkan and Ünal, Hayriye (2020) "Purification and sorting of halloysite nanotubes into homogeneous, agglomeration-free fractions by polydopamine functionalization", ACS Omega, Vol.5, No.29, 17962-17972 (SCI)

Alcan, Gökhan and Aran, Volkan and Ünel, Mustafa and Yilmaz, Metin and Gurel, Cetin and Koprubasi, Kerem (2020) "Optimization-oriented high fidelity NFIR models for estimating indicated torque in diesel engines", International Journal of Automotive Technology, Vol.21, No.3, 729-737 (SCI)

Kefal, Adnan and Öterkuş, Erkan (2020) "Isogeometric iFEM analysis of thin shell structures", Sensors, Vol.20, No.9 (SCI)

Özbulut, Murat and Ramezanzadeh, Shayan and Yıldız, Mehmet and Gören, Ömer (2020) "Modelling of wave generation in a numerical tank by SPH method", Journal of Ocean Engineering and Marine Energy, Vol.6, No.2, 121-136 (ESCI)

Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)

Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) "3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering", Biomedical Materials, Vol.15, No.3 (SCI)

Sadaghiani, Abdolali Khalili and Altay, Rana and Noh, H. and Kwak, H. J. and Şendur, Kürşat and Mısırlıoğlu, Burç and Park, H. S. and Koşar, Ali (2020) "Effects of bubble coalescence on pool boiling heat transfer and critical heat flux - a parametric study based on artificial cavity geometry and surface wettability", International Journal of Heat and Mass Transfer, Vol.147 (SCI)

Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş Mohammadmoradi, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) "Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties", Polymer, Vol.188 (SCI)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2020) "An experimental study on tensile and bending properties of biaxial warp knitted textile composites", Advanced Composite Materials, Vol.29, No.1, 73-88 (SCI)

Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)

Bal, Seval and Sanli, Nazmiye Ozlem and Menceloğlu, Yusuf Z. (2019) "Correction to: Alternative pathogen control chemistry of glass fiber-reinforced polyester panels for cooling towers (Journal of Materials Engineering and Performance, (2019), 28, 10, (6011-6024), 10.1007/s11665-019-04357-9)", Journal of Materials Engineering and Performance, Vol.28, No.12, 7835-7835 (SCI)

Ciftci, Cihan and Şaş Çaycı, Hatice Sinem (2019) "A rational utilization of reinforcement material for flexural design of 3D-printed composite beams", Journal of Reinforced Plastics and Composites, Vol.38, No.23-24, 1040-1054 (SCI)

Jamshidi, Hamid and Gürtan, Mert and Budak, Erhan (2019) "Identification of active number of grits and its effects on mechanics and dynamics of abrasive processes", Journal of Materials Processing Technology, Vol.273 (SCI)

Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) "Dielectrophoretic interaction of circular particles in a uniform electric field", European Journal of Mechanics - B/Fluids, Vol.78, 194-202 (SCI)

Bal, Seval and Sanli, Nazmiye Ozlem and Menceloğlu, Yusuf Z. (2019) "Alternative pathogen control chemistry of glass fiber-reinforced polyester panels for cooling towers", Journal of Materials Engineering and Performance, Vol.28, No.10, 6011-6024 (SCI)

Shafighfard, Torkan and Demir, Eralp and Yıldız, Mehmet (2019) "Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints", Composite Structures, Vol.226 (SCI)

Afghah, Ferdows and Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2019) "Biomimicry in bio-manufacturing: developments in melt electrospinning writing technology towards hybrid biomanufacturing", Applied Sciences (Switzerland), Vol.9, No.17 (SCI)

Kefal, Adnan (2019) "An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures", Ocean Engineering, Vol.188 (SCI)

Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)

Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2019) "A theoretical treatment of THz resonances in semiconductor GaAs p–n junctions", Materials, Vol.12, No.15 (SCI)

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) "Effects of turn-milling conditions on chip formation and surface finish", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 113-116 (SCI)

Çelik, Murat and Çiftçi, Cihan and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem (2019) "Numerical characterization of permeability tensor of fiber preforms for liquid composite molding applications", Advanced Science, Engineering and Medicine, Vol.11, No.7, 633-636 (NA)

Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) "Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites", International Journal of Advanced Manufacturing Technology (SI), Vol.102, No.5-8, 2119-2132 (SCI)

Ertaş Uslu, Merve and Yalçın, Refet Ali and Mısırlıoğlu, Burç and Şendur, Kürşat (2019) "Morphology induced spectral reflectance lineshapes in VO2 thin films", Journal of Applied Physics, Vol.125, No.22 (SCI)

Alkan Taş, Buket and Şehit, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2019) "Carvacrol loaded halloysite coatings for antimicrobial food packaging applications", Food Packaging and Shelf Life, Vol.20 (SCI)

Demir, Eralp and Yousefi Louyeh, Pouya and Yıldız, Mehmet (2019) "Design of variable stiffness composite structures using lamination parameters with fiber steering constraint", Composites Part B: Engineering, Vol.165, 733-746 (SCI)

Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) "Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation", Journal of Chemical Information and Modeling (SI), Vol.59, No.5, 1946-1956 (SCI)

Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)

Kefal, Adnan and Maruccio, Claudio and Quaranta, Giuseppe and Öterkuş, Erkan (2019) "Modelling and parameter identification of electromechanical systems for energy harvesting and sensing", Mechanical Systems and Signal Processing, Vol.121, 890-912 (SCI)

Oğuz, Oğuzhan and Candau, Nicolas and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Seven, Merve Senem and Menceloğlu, Yusuf Z. (2019) "A sustainable approach to produce stiff, super-tough, and heat-resistant poly(lactic acid)-based green materials", ACS Sustainable Chemistry and Engineering, Vol.7, No.8, 7869-7877 (SCI)

Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)

Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019) "Predicting NOx emissions in diesel engines via sigmoid NARX models using a new experiment design for combustion identification", Measurement, Vol.137, 71-81 (SCI)

Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)

Karaguzel, Umut and Budak, Erhan (2018) "Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods", Journal of Materials Processing Technology, Vol.262, 532-540 (SCI)

Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) "Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis", ACS Applied Nano Materials, Vol.1, No.11, 6236-6246 (SCI)

Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)

Toprakhisar, Burak and Nadernezhad, Ali and Bakırcı, Ezgi and Khani, Navid and Akdeniz Skvortsov, Gözde and Koç, Bahattin (2018) "Development of bioink from decellularized tendon extracellular matrix for 3D bioprinting", Macromolecular Bioscience, Vol.18, No.10 (SCI)

Levanyuk, Arkadi P. and Minyukov, Sergey A. and Mısırlıoğlu, Burç (2018) "Loss of elastic stability and formation of inhomogeneous states at phase transitions in thin films on substrates", Ferroelectrics, Vol.533, No.1, 1-9 (SCI, CPCI-S)

Rahmat, Amin and Tofighi, Nima and Yıldız, Mehmet (2018) "A numerical study of Rayleigh-Taylor instability for various Atwood numbers using ISPH method", Progress in Computational Fluid Dynamics, Vol.18, No.5, 267-276 (SCI)

Yılmaz, Çağatay and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2018) "Semi-intrinsic self-healing performance of liquid-cored microcapsules in epoxy matrix", Advances in Polymer Technology, Vol.37, No.5, 1435-1443 (SCI)

Aran, Volkan and Ünel, Mustafa (2018) "Gaussian process regression feedforward controller for diesel engine airpath", International Journal of Automotive Technology, Vol.19, No.4, 635-642 (SCI)

Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) "Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability", CIRP Annals - Manufacturing Technology, Vol.67, No.1, 397-400 (SCI)

Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)

Kocaman, Esat Selim and Yılmaz, Çağatay and Deniz, Ataman and Yıldız, Mehmet (2018) "The performance of embedded fiber Bragg grating sensors for monitoring failure modes of foam cored sandwich structures under flexural loads", Journal of Sandwich Structures and Materials, Vol.20, No.5, 553-577 (SCI)

Mohammad Moradi, Omid and Şen, Canhan and Boni, A. G. and Pintilie, L. and Mısırlıoğlu, Burç (2018) "Strong composition dependence of resistive switching in Ba1-xSrxTiO3 thin films on semiconducting substrates and its thermodynamic analysis", Acta Materialia, Vol.148, 419-431 (SCI)

Ozbulut, M. and Tofighi, N. and Goren, O. and Yıldız, Mehmet (2018) "Investigation of wave characteristics in oscillatory motion of partially filled rectangular tanks", Journal of Fluids Engineering, Transactions of the ASME, Vol.140, No.4 (SCI)

Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) "Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1617-1634 (SCI)

Ghorbani, Morteza and Sözer, Canberk and Alcan, Gökhan and Ünel, Mustafa and Ekici, Sinan and Üvet, Hüseyin and Koşar, Ali (2018) "Biomedical device prototype based on small scale hydrodynamic cavitation", AIP Advances, Vol.8, No.3 (SCI)

Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) "Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection", Desalination, Vol.429, 20-32 (SCI)

Ghorbani, Morteza and Alcan, Gökhan and Khalili Sadaghiani, Abdolali and Mohammadi, Ali and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2018) "Characterization and pressure drop correlation for sprays under the effect of micro scale cavitation", Experimental Thermal and Fluid Science, Vol.91, 89-102 (SCI)

Yılmaz, Çağatay and Akalın, Çağdaş and Günal, İbrahim and Çelik, Hakan and Büyük, Murat and Suleman, Afzal and Yıldız, Mehmet (2018) "A hybrid damage assessment for E-and S-glass reinforced laminated composite structures under in-plane shear loading", Composite Structures, Vol.186, 347-354 (SCI)

Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)

Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)

Kefal, Adnan and Tessler, Alexander and Öterkuş, Erkan (2017) "An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures", Composite Structures, Vol.179, 514-540 (SCI)

Avaz, Merve Senem and Oğuz, Oğuzhan and Kurt, Hasan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2017) "Soft segment length controls morphology of poly(ethylene oxide) based segmented poly(urethane-urea) copolymers in a binary solvent", Computational Materials Science, Vol.138, 58-69 (SCI)

Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2017) "Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification", Mechanical Systems and Signal Processing, Vol.94, 312-321 (SCI)

Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)

Oğuz, Oğuzhan and Koutsoumpis, Stefanos A. and Şimşek, Eren and Yılgör, Emel and Yılgör, İskender and Pissis, Polycarpos and Menceloğlu, Yusuf Z. (2017) "Effect of soft segment molecular weight on the glass transition, crystallinity, molecular mobility and segmental dynamics of poly(ethylene oxide) based poly(urethane-urea) copolymers", RSC Advances, Vol.7, No.65, 40745-40754 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Yılmaz, Çağatay and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2017) "Monitoring the interface and bulk self-healing capability of tri-axial electrospun fibers in glass fiber reinforced epoxy composites", Composites Part A: Applied Science and Manufacturing, Vol.99, 221-232 (SCI)

Saner Okan, Burcu (2017) "Fabrication of multilayer graphene oxide reinforced high density polyethylene nanocomposites with enhanced thermal and mechanical properties via thermokinetic mixing", Turkish Journal of Chemistry, Vol.41, No.3, 381-390 (SCI)

Ullah, Mohib and Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Siddiq, M. and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2017) "Manufacturing functionalized mono-crystalline diamond containing electrospun fibers reinforced epoxy composites with improved mechanical characteristics", Diamond and Related Materials, Vol.76, 90-96 (SCI)

Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) "Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs", CIRP Annals - Manufacturing Technology, Vol.66, No.1, 229-232 (SCI)

Evren Han, Sanem and Yavuz, Fırat and Ünel, Mustafa (2017) "High precision stabilization of pan-tilt systems using reliable angular acceleration feedback from a master-slave Kalman filter". Published Online First http://dx.doi.org/10.1007/s10846-017-0522-9

Akhlaghi Baghoojari, Omid and Menceloğlu, Yusuf Z. and Akbulut, Özge (2017) "Poly(carboxylate ether)-based superplasticizer achieves workability retention in calcium aluminate cement", Scientific Reports, Vol.7 (SCI)

Mısırlıoğlu, Burç and Alpay, S. P. (2017) "Compositionally graded ferroelectrics as wide band gap semiconductors: Electrical domain structures and the origin of low dielectric loss", Acta Materialia, Vol.122, 266-276 (SCI)

Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)

Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)

Sarıer, Nihal and Arat, Refik and Menceloğlu, Yusuf Z. and Önder, Emel and Boz, Ezgi Ceren and Oğuz, Oğuzhan (2016) "Production of PEG grafted PAN copolymers and their electrospun nanowebs as novel thermal energy storage materials", Thermochimica Acta, Vol.643, 83-93 (SCI)

Janipour, Mohsen and Mısırlıoğlu, Burç and Şendur, Kürşat (2016) "Tunable surface plasmon and phonon polariton interactions for moderately doped semiconductor surfaces", Scientific Reports, Vol.6 (SCI)

Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet (2016) "The effect of normal electric field on the evolution of immiscible Rayleigh-Taylor instability", Theoretical and Computational Fluid Dynamics, Vol.30, No.5, 469-483 (SCI)

Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) "Multifunctional 3D printing of heterogeneous hydrogel structures", Scientific Reports, Vol.6 (SCI)

Yurtdaş Kırımlıoğlu, Gülsel and Menceloğlu, Yusuf Z. and Erol, Kevser and Yazan, Yasemin (2016) "In vitro/in vivo evaluation of gamma-aminobutyric acid-loadedN,N-dimethylacrylamide-based pegylated polymeric nanoparticles for brain delivery to treat epilepsy". Published Online First http://dx.doi.org/10.1080/02652048.2016.1234515

Akay, Erdem and Yılmaz, Çağatay and Kocaman, Esat Selim and Türkmen, Halit S. and Yıldız, Mehmet (2016) "Monitoring Poisson's ratio degradation of FRP composites under fatigue loading using biaxially embedded FBG sensors", Materials, Vol.9, No.9 (SCI)

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa (2016) "A new visual tracking method for the analysis and characterization of jet flow". Published Online First http://dx.doi.org/10.1016/j.flowmeasinst.2016.08.005

Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) "Machining strategy development and parameter selection in 5-axis milling based on process simulations", International Journal of Advanced Manufacturing Technology, Vol.85, No.5-8, 1483-1500 (SCI)

Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) "Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering", Biofabrication, Vol.8, No.2 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. (2016) "Manufacturing of multilayer graphene oxide/poly(ethylene terephthalate) nanocomposites with tunable crystallinity, chain orientations and thermal transitions", Materials Chemistry and Physics, Vol.176, 58-67 (SCI)

Mısırlıoğlu, Burç and Şendur, Kürşat (2016) "Ferroelectric/semiconductor/tunnel-junction stacks for nondestructive and low-power read-out memory", IEEE Transactions on Electron Devices, Vol.63, No.6, 2374-2379 (SCI)

Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) "Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 121-124 (SCI)

Avcı, Gökay and Akhlaghi Baghoojari, Omid and Üstbaş, Burçin and Özbay, Ceren and Menceloğlu, Yusuf Z. and Akbulut, Özge (2016) "A PCE-based rheology modifier allows machining of solid cast green bodies of alumina", Ceramics International, Vol.42, No.3, 3757-3761 (SCI)

Mısırlıoğlu, Burç and Şen, Canhan and Kesim, M. T. and Alpay, S. P. (2016) "Low-voltage ferroelectric-paraelectric superlattices as gate materials for field-effect transistors", Journal of Materials Science, Vol.51, No.1, 487-498 (SCI)

Keulen, Casey J. and Akay, Erdem and Melemez, Fazlı Fatih and Kocaman, Esat Selim and Deniz, Ataman and Yılmaz, Çağatay and Boz, Talha and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2016) "Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings", Journal of Intelligent Material Systems and Structures, Vol.27, No.1, 17-27 (SCI)

Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin (2015) "3-boyutlu biyobasım (3D bioprinting)", Türkiye Klinikleri Tıbbi Onkoloji Özel Dergisi, Vol.8, No.2, 155-161 (NA)

Saner Okan, Burcu and Zanjani, Jamal Seyyed Monfared and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. (2015) "Morphology-controllable synthesis and characterization of carbon nanotube/polypyrrole composites and their hydrogen storage capacities", Materials Chemistry and Physics, Vol.167, 171-180 (SCI)

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations", Precision Engineering, Vol.42, 53-65 (SCI)

Haghighi Poudeh, Leila and Saner Okan, Burcu and Seyyed Monfared Zanjani, Jamal and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Design and fabrication of hollow and filled graphene-based polymeric spheres via core-shell electrospraying", RSC Advances, Vol.5, No.111, 91147-91157 (SCI)

Üzüşen, Doğan and Demir, Ebru and Perk, Osman Yavuz and Oral, Özlem and Ekici, Sinan and Ünel, Mustafa and Gözüaçık, Devrim and Koşar, Ali (2015) "Assessment of probe-to-specimen distance effect in kidney stone treatment with hydrodynamic cavitation", Journal of Medical Devices, Vol.9, No.3 (SCI)

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Letofsky-Papst, Ilse and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2015) "Repeated self-healing of nano and micro scale cracks in epoxy based composites by tri-axial electrospun fibers including different healing agents", RSC Advances, Vol.5, No.89, 73133-73145 (SCI)

Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Tang, S. and Hamada, H. and Yıldız, Mehmet (2015) "Effect of fiber densities on impact properties of biaxial warp-knitted textile composites", Journal of Reinforced Plastics and Composites, Vol.34, No.16, 1287-1297 (SCI)

Kocaman, Esat Selim and Keulen, Casey J. and Akay, Erdem and Yıldız, Mehmet and Türkmen, Halit S. and Suleman, Afzal (2015) "An experimental study on the effect of length and orientation of embedded FBG sensors on the signal properties under fatigue loading". Published Online First http://dx.doi.org/10.1515/secm-2014-0029

Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, M. (2015) "Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes", International Journal of Advanced Manufacturing Technology, Vol.77, No.9-12, 1993-2004 (SCI)

Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)

Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "In-process tool point FRF identification under operational conditions using inverse stability solution", International Journal of Machine Tools and Manufacture, Vol.89, 64-73 (SCI)

Zanjani, Jamal Seyyed Monfared and Saner Okan, Burcu and Letofsky-Papst, Ilse and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2015) "Rational design and direct fabrication of multi-walled hollow electrospun fibers with controllable structure and surface properties", European Polymer Journal (SI), Vol.62, 66-76 (SCI)

Kekeç, İbrahim Taygun and Yıldırım, Alper and Ünel, Mustafa (2014) "A new approach to real-time mosaicing of aerial images", Robotics and Autonomous Systems, Vol.62, No.12, 1755-1767 (SCI)

Shojaeian, Mostafa and Yıldız, Mehmet and Koşar, Ali (2014) "Heat transfer characteristics of plug flows with temperature-jump boundary conditions in parallel-plate channels and concentric annuli", International Journal of Thermal Sciences, Vol.84, 252-259 (SCI)

Rahmat, Amin and Tofighi, Nima and Safdari Shadloo, Mostafa and Yıldız, Mehmet (2014) "Numerical simulation of wall bounded and electrically excited Rayleigh-Taylor instability using incompressible smoothed particle hydrodynamics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol.460, 60-70 (SCI)

Altıntaş, Y. and Kersting, P. and Biermann, D. and Budak, Erhan and Denkena, B. and Lazoğlu, I. (2014) "Virtual process systems for part machining operations", CIRP Annals - Manufacturing Technology, Vol.63, No.2, 585-605 (SCI)

Samanta, Kuntal and Özbolat, İbrahim T. and Koç, Bahattin (2014) "Optimized normal and distance matching for heterogeneous object modeling", Computers & Industrial Engineering, Vol.69, 1-11 (SCI)

Özel, Burcu and Örüm, Aslıhan and Yıldız, Mehmet and Menceloğlu, Yusuf Z. (2014) "Experimental study on the rheology of anisotropic, flocculated and low volume fraction colloids", Korea-Australia Rheology Journal, Vol.26, No.1, 105-116 (SCI)

Mısırlıoğlu, Burç and Kesim, M. T. and Alpay, S. P. (2014) "Strong dependence of dielectric properties on electrical boundary conditions and interfaces in ferroelectric superlattices", Applied Physics Letters, Vol.104, No.2 (SCI)

Keulen, Casey J. and Yıldız, Mehmet and Suleman, Afzal (2014) "Damage detection of composite plates by Lamb wave ultrasonic tomography with a sparse hexagonal network using damage progression trends", Shock and Vibration (SCI)

Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk (2013) "Modeling and control of a variable speed variable pitch angle prototype wind turbine", Mathematical and Computational Applications, Vol.18, No.3, 408-420 ()

Kekeç, İbrahim Taygun and Ünel, Mustafa and Erdoğan, Hakan (2013) "Real-time multiple object tracking using virtual shells", Mathematical and Computational Applications, Vol.18, No.3, 373-382 ()

Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Very large dielectric response from ferroelectric nanocapacitor films due to collective surface and strain relaxation effects", Journal of Applied Physics, Vol.114, No.19 (SCI)

Safdari Shadloo, Mostafa and Rahmat, Amin and Yıldız, Mehmet (2013) "A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid", Computational Mechanics, Vol.52, No.3, 693-707 (SCI)

Özden-Yenigün, Elif and Şimşek, Eren and Menceloğlu, Yusuf Z. and Atılgan, Canan (2013) "Molecular basis for solvent dependent morphologies observed on electrosprayed surfaces", Physical Chemistry Chemical Physics, Vol.15, No.41, 17862-17872 (SCI)

Malay Heinz, Özge and Yılgör, İskender and Menceloğlu, Yusuf Z. (2013) "Effects of solvent on TEOS hydrolysis kinetics and silica particle size under basic conditions", Journal of Sol-Gel Science and Technology, Vol.67, No.2, 351-361 (SCI)

Özbolat, İbrahim T. and Marchany, Michelle and Joseph, A. Gardella, Jr., and Koç, Bahattin (2013) "Computer-aided 4D modeling of hydrolytic degradation in micropatterned bioresorbable membranes", Journal of Medical Devices, Vol.7, No.2 (SCI)

Safdari Shadloo, Mostafa and Zainali, Amir and Yıldız, Mehmet (2013) "Simulation of single mode Rayleigh-Taylor instability by SPH method", Computational Mechanics, Vol.51, No.5, 699-715 (SCI)

Mısırlıoğlu, Burç and Yıldız, Mehmet (2013) "Dielectric response of fully and partially depleted ferroelectric thin films and inversion of the thickness effect", Journal of Physics D: Applied Physics, Vol.46, No.12 (SCI)

Budak, Erhan and Çomak, Alptunç and Öztürk, Erdem (2013) "Stability and high performance machining conditions in simultaneous milling", CIRP Annals - Manufacturing Technology, Vol.62, No.1, 403-406 (SCI)

Koç, Bahattin, Eklemeli imalat: tasarım felsefesini değiştiren yeni bir imalat anlayışı, Ankara: Nobel Akademik Yayıncılık, April 2024

Tehranizadeh, Faraz and Barzegar, Zahra and Budak, Erhan, "Special milling tools for improving productivity", A Closer Look at Milling Machines and Processes, Budak, Erhan (ed.), New York: Nova Science Publishers, April 2024, 207-241

Acar, Anıl Ahmet and Polat, Mehmet Furkan and Koç, Bahattin, "Eklemeli imalat için tasarım prensipleri", Tasarım Felsefesini Değiştiren Yeni Bir İmalat Anlayışı: Eklemeli İmalat, Yasa, Evren and Yılmaz, Oğuzhan and Kayacan, M. Cengiz and Saklakoğlu, İbrahim Etem (eds.), Ankara: Nobel Akademik Yayıncılık, April 2024, 255-298

Çetiner, Büşra and Başkan Bayrak, Havva and Saner Okan, Burcu, "Application, recycling, environmental and safety issues, and future prospects of crystalline polymer composites", Polymer Crystallization: Methods, Characterization and Applications, Parameswaranpillai, Jyotishkumar and Jacob, Jenny and Krishnasamy, Senthilkumar and Jayakumar, Aswathy and Hameed, Nishar (eds.), Wiley, June 2023, 323-358

Alkoy, Sedat and Okatan, M. B. and Mısırlıoğlu, Burç and Menşur-Alkoy, Ebru, "Electrocaloric ceramics", Encyclopedia of Materials: Electronics, Haseeb, A. S. M. A. (ed.), Amsterdam: Elsevier, April 2023, 208-217

Dericiler, Kuray and Aliyeva, Nargiz and Mohammadjafari Sadeghi, Hadi and Şaş Çaycı, Hatice Sinem and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Graphene in automotive parts", Nanotechnology in the Automotive Industry, Song, Huaihe and Nguyen, Tuan Anh and Yasin, Ghulam and Singh, Nakshatra Bahadur and Gupta, Ram K. (eds.), UK: Elsevier, April 2022, 623-651

Hezarkhani, Marjan and Wis, Abdulmounem Alchek and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Nanomaterials recycling in industrial applications", Nanomaterials Recycling, Rai, Mahendra and Nguyen, Tuan Anh (eds.), Elsevier, January 2022, 375-395

Daskalakis, Evangelos and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon, "Bioglasses for bone tissue engineering", Bio-Materials and Prototyping Applications in Medicine, Bártolo, Jorge and Bidanda, Bopaya (eds.), Switzerland: Springer International Publishing, October 2020, 165-193

Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya (eds.), Amsterdam: Elsevier, August 2020, 157-182

Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Three-dimensional graphene-based structures: production methods, properties, and applications", Handbook of Graphene: Growth, Synthesis, and Functionalization, Celasco, Edvige and Chaika, Alexander N. (eds.), USA: Wiley-Scrivener, July 2019, 359-387

Hayat Soytaş, Serap and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z., "Polymer nanocomposites with decorated metal oxides", Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications, Pielichowski, Krzysztof and Majka, Tomasz (eds.), United States: Elsevier, September 2018, 287-323

Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Self-healing thermosetting composites: concepts, chemistry and future advances", Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials, Delville, Marie-Helene and Taubert, Andreas (eds.), UK: Wiley, September 2018

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, "Single droplet tracking in jet flow", Image Analysis and Recognition: 13th International Conference, ICIAR 2016, in Memory of Mohamed Kamel, Póvoa de Varzim, Portugal, July 13-15, 2016, Proceedings, Campilho, Aurello and Karray, Fakhri (eds.), Switzerland: Springer International Publishing, July 2016, 415-422

Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, "Bioprinting: application of additive manufacturing in medicine", Additive Manufacturing, Bandyopadhyay, Amit and Bose, Susmita (eds.), United States: CRC Press, June 2015, 197-214

Rocha, B. and Silva, C. and Keulen, C. and Yıldız, Mehmet and Suleman, A., "New trends in SHM, structural health monitoring of aircraft structures", New Trends in Structural Health Monitoring, Wieslaw, Ostachowicz and Güemes, Alfredo (eds.), Germany: Springer, January 2013

Loulou, Asmaa and Ünel, Mustafa, "RelViTNet: relative camera pose estimation network using vision transformers", 50th Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE Computer Society, November 2024

Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Koç, Bahattin, "Defect prediction in directed energy deposition using an ensemble of clustering models", 22nd IEEE International Conference on Industrial Informatics (INDIN), Institute of Electrical and Electronics Engineers, August 2024

Farea, Shawqi Mohammed Othman and Mumcuoğlu, Mehmet Emin and Ünel, Mustafa and Mise, Serdar and Ünsal, Simge and Çevik, Enes and Yılmaz, Metin and Köprübaşı, Kerem, "Prediction of failures in air pressure system: a semi-supervised framework based on transformers", 22nd IEEE International Conference on Industrial Informatics (INDIN), Institute of Electrical and Electronics Engineers, August 2024

Mumcuoğlu, Mehmet Emin and Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Mise, Serdar and Unsal, Simge and Cevik, Enes and Yilmaz, Metin and Koprubasi, Kerem, "Air pressure system failures detection using LSTM-autoencoder", IEEE International Workshop on Metrology for Automotive (MetroAutomotive), Institute of Electrical and Electronics Engineers, June 2024, 82-87

Zemzemoğlu, Muhammed and Ünel, Mustafa, "A hierarchical learning-based approach for the automatic defect detection and classification of AFP process using thermography", 49th Annual Conference of the IEEE Industrial Electronics Society (IECON 2023), IEEE Computer Society, October 2023

Topal, Serra and Beylergil, Bertan and Yıldırım, Ceren and Ünal, Serkan and Yıldız, Mehmet, "Advancing aircraft repair patch prepregs: enhancing composite performance through resin type, cure cycle, and nanomaterial innovations", 3rd Global Conference on Advanced Nanotechnology & Nanomaterials, Berlin, Germany: Peers Alley Media, September 2023

Kienast, Pascal and Tunç, Lütfi Taner and Koca, Recep and Olgu, Ozan and Ganser, Philip and Bergs, Thomas, "Improving dynamic process stability in finishing of thin-walled workpieces by optimal selection of stock shape", 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Elsevier, July 2023

Mumcuoğlu, Mehmet Emin and Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Mise, Serdar and Unsal, Simge and Yilmaz, Metin and Koprubasi, Kerem, "Fuel consumption classification for heavy-duty vehicles: a novel approach to identifying driver behavior and system anomalies", AEIT International Conference on Electrical and Electronic Technologies for Automotive, AEIT AUTOMOTIVE 2023, Institute of Electrical and Electronics Engineers, July 2023

İz, Selim Ahmet and Ünel, Mustafa, "Vision-based system identification of a quadrotor", 8th International Conference on Image, Vision and Computing (ICIVC 2023), IEEE (Institute of Electrical and Electronics Engineers), July 2023, 584-590

Kendibilir, Abdullah and Kefal, Adnan, "Lightweight design and topology optimization of marine structures using peridynamics", Ringsberg, J. W. and Guedes Soares, C. (eds.), 9th International Conference on Marine Structures, MARSTRUCT 2023, London: CRC Press, April 2023, 827-834

Tehranizadeh, Faraz and Budak, Erhan, "Special milling tools to suppress self-excited chatter vibrations in milling", Conte, G. and Molnar, T. (eds.), 17th IFAC Workshop on Time Delay Systems, TDS 2022, Elsevier, December 2022, 115-120

Ünal, Serkan and Kızıldağ, Nuray and Güçlü, Serkan and Dızman, Bekir and Menceloğlu, Yusuf Z., "Sustainability for polymeric fibers and textiles", Ulcay, Yusuf and Demir, Ali and Kızıldağ, Nuray and Polat, Yusuf and Seyhan, Aybeniz and Sağırlı, Merve Nur (eds.), 11th International Fiber and Polymer Research Symposium, ULPAS, November 2022, 247-248

Aydemir, Eren and Fetic, Naida and Ünel, Mustafa, "H-VLO: hybrid LiDAR-camera fusion for self-supervised odometry", IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), IEEE (Institute of Electrical and Electronics Engineers), October 2022

Hatipoğlu, Ersen and Bakkal, Mustafa and Budak, Erhan, "On the finite element modeling best practices for the metal cutting simulations", Kılıç, Engin (ed.), 19th International Conference on Machine Design and Production (UMTIK), Atilim University, August 2022

Karimi, Sasan and Barzegar Osgouei, Ali and Yıldız, Mehmet and Şaş Çaycı, Hatice Sinem, "Parametric study of afp lay-up process parameters effect on the air permeability of thermoplastic composites and their suitability for out of autoclave post-processing by a new method", Vassilopoulos, A. P. and Michaud, V. (eds.), 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), June 2022, 981-989

Gul, Saher and Tabrizi, Isa Emami and Saner Okan, Burcu and Yıldız, Mehmet and Kefal, Adnan, "Effect of hybridization on the failure mechanisms of thin/thick hybrid carbon/glass fiber-reinforced composites under flexural loading", Vassilopoulos, A. P. and Michaud, V. (eds.), 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM 2022, Composite Construction Laboratory (CCLab), Ecole Polytechnique Federale de Lausanne (EPFL), June 2022, 98-105

Fetic, Naida and Aydemir, Eren and Ünel, Mustafa, "LiDAR-camera fusion for depth enhanced unsupervised odometry", IEEE 95th Vehicular Technology Conference: (VTC2022-Spring), IEEE (Institute of Electrical and Electronics Engineers), June 2022

Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan, "Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]", Özlü, Emre (ed.), 11th International Congress on Machining (UTIS), UTIS, December 2021

Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan, "Gantry optimization of a 5-axis cnc machine tool considering dynamic modes", Özlü, Emre (ed.), 11th International Congress on Machining (UTIS), UTIS, December 2021

Hocaoğlu, Yarkın and Mumcuoğlu, Mehmet Emin and Ünel, Mustafa, "Disturbance observer based fault tolerant control of a quadrotor helicopter", 47th Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE Computer Society, October 2021

Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan, "Effect of spindle design on spindle dynamics and chatter stability", International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, The Korean Society for Precision Engineering, July 2021

Başoğlu, Muhammed Fatih and Zerin, Zihni and Kefal, Adnan and Öterkuş, Erkan, "Development of a micro-crack toughening mechanism for unidirectional composite plates by using peridynamics", 24th International Conference on Composite Structures (ICCS24), Porto, Portugal: University of Porto, June 2021, 101-101

Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet, "Real-time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology", 8th International Conference on Marine Structures (MARSTRUCT), Taylor & Francis, June 2021

Mumcuoğlu, Mehmet Emin and Alcan, Gökhan and Ünel, Mustafa and Çiçek, Onur and Mutluergil, Mehmet and Yılmaz, Metin and Köprübaşı, Kerem, "Driver evaluation in heavy duty vehicles based on acceleration and braking behaviors", 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), IEEE (Institute of Electrical and Electronics Engineers), October 2020, 447-452

Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improving vision based pose estimation using LSTM neural networks", 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), IEEE (Institute of Electrical and Electronics Engineers), October 2020, 483-488

Dızman, Bekir and Şahin, Zeynep and Behroozi Kohlan, Taha and Ateşpare, Asu Ece and Sümbül Boztaş, Ayşe Nur and Uçar, Ali Cuma and Nakipoğlu, Büşra, "Polyoxazolines: a review of their synthesis, properties, and applications", 32. Ulusal Kimya Kongresi, Türkiye Kimya Derneği, September 2020, 65-65

Fernandes, Mariana and Sohouli, Abdolrasoul and Yıldız, Mehmet and Suleman, Afzal, "Path planning and fiber angle optimization of continuous fiber composites for additive manufacturing", Joint Event: 23rd International Conference on Composite Structures (ICCS23) & 6th International Conference on Mechanics of Composites (MECHCOMP6), University of Porto, September 2020

Daskalakis, Evangelos and Liu, Fengyuan and Acar, Anıl Ahmet and Dinea, Edera-Elena and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge, "3D-printed composite bone bricks for large bone tissue applications", Mansour, G. and Tzetzis, D. and Kyratsis, P. (eds.), 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), EDP Sciences, August 2020

Maruccio, Claudio and Kefal, Adnan, "Electromechanical contact elements for modelling adhesion and interfacial interactions in electrospun nanofibers systems", 1st Virtual Euroepan Conference on Fracture (VECF1), Elsevier, June 2020, 2142-2147

Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene", Cebeci, F. C. and Menceloğlu, Y. Z. and Ünal, S. and Ulcer, Y. (eds.), 35th International Conference of the Polymer Processing Society (PPS), American Institute of Physics, January 2020

Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Ozunlu, Burcu Girginer and Yağcı, Yavuz Emre, "Graphene from waste tire by recycling technique for cost-effective and light-weight automotive plastic part production", Cebeci, F. C. and Menceloğlu, Y. Z. and Unal, S. and Ulcer, Y. (eds.), 35th International Conference of the Polymer Processing Society (PPS 2019), American Institute of Physics, January 2020

Gönül, Bora and Tunç, Lütfi Taner, "Model based analysis of kinematic redundancy for increased chatter stability in robotic milling", 10th International Congress on Machining, UTIS, November 2019

Özcan, Yiğit and Tunç, Lütfi Taner, "Experimental investigation on tool path patterns in controlled depth abrasive water jet machining", 15th International Conference on High Speed Machining (HSM 2019), CMTS (Czech Machine Tool Society), October 2019

Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Poyraz, Özgür and Akbulut, Güray, "Topology optimization and finite elemental analysis for an inconel 718 engine mounting bracket manufactured via electron beam melting", Additive Manufacturing Conference (AMCTURKEY), TAMA (Turkish Additive Manufacturing Association), October 2019

Daskalakis, Evangelos and Liu, Fengyuan and Smith, Benedict and Acar, Anıl Ahmet and Aslan, Enes and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge, "Polymer-ceramic bone bricks for tissue engineering", AMMM - Additive Manufacturing Meets Medicine 2019, Infinite Science Publishing, September 2019

Kaya, Cengiz and Avcıoğlu, Suna and Buldu, Merve and Menceloğlu, Yusuf Z. and Üstündağ, Cem B. and Kam, Erol and Kaptan, H. Yılmaz and Kaya, Figen, "Nano boron carbide (B4C) reinforced polymer matrix composites for shielding and engineering applications: issues and challenges", 5th International Conference on Traditional and Advanced Ceramics (ICTA2019),, August 2019, 23-23

Emami Tabrizi, Isa and Zanjani, J. Seyyed Monfared and Yıldız, Mehmet, "Investigation of damage accumulation in glass/carbon fiber hybrid composites through acoustic emission method", 22nd International Conference on Composites Materials (ICCM22), Melbourne: International Committee on Composite Materials, August 2019, 1907-1915

Mumcuoğlu, Mehmet Emin and Alcan, Gökhan and Ünel, Mustafa and Çiçek, Onur and Mutluergil, Mehmet and Yılmaz, Metin and Köprübaşı, Kerem, "Driving behavior classification using long short term memory networks", International Conference of Electrical and Electronic Technologies for Automotive, IEEE (Institute of Electrical and Electronics Engineers), July 2019

Özşahin, Orkun and Ritou, Mathieu and Budak, Erhan and Rabréau, Clément and Le Loch, Sebastien, "Identification of spindle dynamics by receptance coupling for non-contact excitation system", Mcleay, T. and Öztürk, Erdem and Msaoubi, R. (eds.), 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK: Elsevier, June 2019, 273-278

Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Improved stable conditions in robotic milling by kinematic redundancy", Mcleay, Tom and Öztürk, Erdem and Msaoubi, Rachid (eds.), 17th CIRP Conference on Modelling of Machining Operations, Elsevier, June 2019, 485-490

Kaya, Cengiz and Buldu, Merve and Menceloğlu, Yusuf Z. and Kaya, Figen and Avcıoğlu, Suna, "Processing of surface modified nano boron carbide (B4C) containing flexible composites as shielding materials", 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019), MSAM, May 2019

Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet, "Machine tool design optimization considering thermo-mechanical behaviour in the structure and at the interfaces", 8th International Conference on Virtual Machining Process Technology (VMPT 2019), UBC, April 2019

Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan, "An experimental study on surface errors in orthogonal turn-milling process", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018

Şendur, Kürşat and Ertaş Uslu, Merve and Mısırlıoğlu, Burç, "Fabrication and spectral properties of textured phase change VO2 nanostructures obtained via oxidation of thermally evaporated metallic vanadium films", Materials Research Society Fall 2018 Meetings, MRS (Materials Research Society), November 2018

Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Kinematic based selection of the workpiece location in robotic milling", International Symposium on Machining,, November 2018

Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin, "Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications", Biofabrication Conference 2018, Wurzberg, Germany: ISBF (International Society for Biofabrication), October 2018

Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet, "Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, September 2018

Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem, "Diesel engine NOx emission modeling using a new experiment design and reduced set of regressors", Proceedings of 18th IFAC Symposium on System Identification (SYSID 2018), IFAC (International Federation of Automatic Control), July 2018, 168-173

Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan, "Investigating high productivity conditions for turn-milling in comparison to conventional turning", Stepan, Gabor (ed.), 8th CIRP Conference on High Performance Cutting (HPC 2018), Elsevier, June 2018, 259-262

Fuad, Zain and Ünel, Mustafa, "Human action recognition using fusion of depth and inertial sensors", Campilho, Aurelio and Karray, Fakhri and Ter Haar Romeny, Bart (eds.), 15th International Conference on Image Analysis and Recognition, ICIAR 2018, Switzerland: Springer, June 2018, 373-380

Yildirim, Afsin T. and Eroglu, Fatih and Yesilyurt, Ogulcan and Albayrak, Kubilay and Şaş Çaycı, Hatice Sinem and Ciftci, Cihan, "Effect of ambient temperature on the flexural behavior of 3D printed composite beams", Storage, K. and Sutter, T. and Beckwith, S. and Bond, G. and Storage, T. (eds.), SAMPE Long Beach 2018 Conference and Exhibition, Society for the Advancement of Material and Process Engineering, May 2018

Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet, "Isogeometric analysis using peridynamics and XFEM", 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, January 2018

Aran, Volkan and Ünel, Mustafa, "Data driven disturbance observer design and control for diesel engine airpath", 11th Asian Control Conference (ASCC), IEEE (Institute of Electrical and Electronics Engineers), December 2017, 2600-2605

Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan, "Development of turn-milling machine tool program parameters based on basic cutting geometry", 8th International Symposium on Machining, UTIS, November 2017

Tunç, Lütfi Taner and Sapmaz, Ömer Faruk, "Challenges for industrial robots towards milling applications", 8th International Symposium on Machining (UTIS 2017), UTIS, November 2017

Erkoç İlter, Selda and Sharabati, Jalal and Saffarimiandoab, Farzin and Güçlü, Serkan and İmer, Derya Yüksel and Koyuncu, İsmail and Ünal, Serkan and Menceloğlu, Yusuf Z., "High performance polyamide thin film composite (PA-TFC) desalination membranes modified by zwitterionic silanes", 254th National Meeting and Exposition of the American-Chemical-Society (ACS) on Chemistry's Impact on the Global Economy, ACS (American Chemical Society), August 2017

Nadernezhad, Ali and Khani, Navid and Koç, Bahattin, "Biomanufacturing of heterogeneous hydrogel structures with patterned electrically conductive regions", Shih, Albert and Cao, Jian (eds.), 3rd CIRP Conference on BioManufacturing, Elsevier, July 2017, 44-47

Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E., "Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology", 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Sabanci University, July 2017

Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet S., "The effect of linear guide representation for topology optimization of a five-axis milling machine", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), Elsevier, June 2017, 487-492

Mohammadi, Yaser and Tunç, Taner L. and Budak, Erhan, "Investigation of process damping effect for multi-mode milling systems", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, June 2017, 198-203

Zaki, Hammad and Ünel, Mustafa and Yıldız, Yıldıray, "Trajectory control of a quadrotor using a control allocation approach", International Conference on Unmanned Aircraft Systems (ICUAS 2017), IEEE (Institute of Electrical and Electronics Engineers), June 2017

Jamshidi, Hamid and Yastıkcı, Batuhan and Gürtan, Mert and Budak, Erhan, "Grinding force model for Inconel 718 with CBN and conventional wheels", 6th International Conference on Virtual Machining Process Technology (VMPT), Elsevier, May 2017

Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi", Kaynak, Yusuf (ed.), 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Marmara University, November 2016

Aran, Volkan and Ünel, Mustafa, "Feedforward mapping for engine control", 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE (Institute of Electrical and Electronics Engineers), October 2016, 154-159

Evren Han, Sanem and Ünel, Mustafa, "Stabilization of a pan-tilt system using a polytopic quasi-LPV model and LQR control", 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), IEEE (Institute of Electrical and Electronics Engineers), October 2016, 636-641

Azvar, Milad and Budak, Erhan, "Multi-dimensional modelling of chatter stability in parallel turning operation", 17th International Conference on Machine Design and Production, Atilim University, July 2016

Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin, "Cell sheet as a bioink for 3D bioprinting", Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 461-461

Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat, "Modeling and measurement of micro end mill dynamics using inverse stability approach", 7th CIRP Conference on High Performance Cutting (HPC 2016), Elsevier, June 2016, 242-245

Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H., "Frezeleme esnasındaki tezgâh dinamiğinin belirlenmesi ve modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015

Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan, "Yüksek hızlı iş millerinin termal modellemesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015

Alcan, Gökhan and Ghorbani, Morteza and Koşar, Ali and Ünel, Mustafa, "Vision based cone angle estimation of bubbly cavitating flow and analysis of scattered bubbles using micro imaging techniques", 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015), USA: IEEE Industrial Electronics Society, November 2015

Efe, Mehmet Önder and Ünel, Mustafa and Erbatur, Kemalettin and Kaynak, Ünver and Leblebicioğlu, Kemal, "İnsansız hava aracı projeleri ve kaynak sağlayan programlar üzerine (On UAV projects and funding agencies)", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı (TOK 2015), Pamukkale, Denizli: TOK (Otomatik Kontrol Türk Milli Komitesi), September 2015, 192-199

Yıldız, Yıldıray and Ünel, Mustafa and Demirel, Ahmet Eren, "Adaptive nonlinear hierarchical control of a quad tilt-wing UAV", European Control Conference (ECC 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2015, 3623-3628

Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa, "Experimental investigation of tool wear in micro milling", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015

Tofighi, Nima and Özbulut, Murat and Feng, James J. and Yıldız, Mehmet, "ISPH simulation of the motion of elliptic particles under external electric field", 10th International Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) Workshop, UK: SPHERIC (Smoothed Particle Hydrodynamics European Research Interest Community), June 2015

Çelebi, Ceren and Özlü, Emre and Budak, Erhan, "Experimental and analytical investigation of third deformation zone in orthogonal cutting", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015

Tofighi, Nima and Özbulut, Murat and Rahmat, Amin and Feng, James J. and Yıldız, Mehmet, "Migration of a rigid disc in couette flow subject to an external electric field simulated using ISPH", Schrefler, Bernhard A. and Oñate, Eugenio and Papadrakakis, Manolis (eds.), 6th International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS), Barcelona, Spain: CIMNE (International Center for Numerical Methods in Engineering), May 2015, 725-733

Özbulut, Murat and Tofighi, Nima and Yıldız, Mehmet and Gören, Ömer, "Sph modelling of long-term sway-sloshing motion in a rectangular tank", The Twenty-fifth International Offshore and Polar Engineering Conference, Richardson, Texas: International Society of Offshore and Polar Engineers 2015

Üstündağ, Barış Can and Ünel, Mustafa, "Human action recognition using histograms of oriented optical flows from depth", Bebis, George and Boyle, Richard and Parvin, Bahram and Koracin, Darko and McMahan, Ryan and Jerald, Jason and Zhang, Hui and Drucker, Steven M. and Kambhamettu, Chandra and El Choubassi, Maha and Deng, Zhigang and Carlson, Mark (eds.), 10th International Symposium on Visual Computing (ISVC 2014), Switzerland: Springer International Publishing, November 2014, 629-638

Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Dik frezeyle tornalama işleminde eksenler arası ofsetin etkisi ve takım ömrü (Tool life and the effect of axis offset in orthogonal turn-milling)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Universitesi, October 2014

Baytok, Esma and Özlü, Emre and Budak, Erhan, "Titanyum ve alaşımlarının yüksek performanslı işlenmesi (High performance machining of titanium and its alloys)", 5. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2014), Bursa, Türkiye: Uludağ Üniversitesi, October 2014

Demirel, Ahmet Eren and Ünel, Mustafa, "Prototip Bir ornithopterin modellenmesi, denetimi ve benzetimi", Bingül, Zafer (ed.), 2014 Otomatik Kontrol Ulusal Toplantısı (TOK 2014), Kocaeli, Türkiye: Kocaeli Üniversitesi, September 2014, 108-113

Uysal, Emre and Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Investigating eccentricity effects in turn-milling operations", 6th CIRP International Conference on High Performance Cutting (HPC2014), Amsterdam, Netherlands: Elsevier, June 2014, 176-181

Koç, Bahattin and Özler, Saime Burçe and Küçükgül, Can and Altunbek, Mine and Sen, O. and Çulha, M., "3D Bioprinting of aortic structures with HDF cells", Termis EU 2014 Congress, Hoboken, NJ, USA: Wiley, June 2014, 391-392

Demircan, Özgür and Yılmaz, C. and Kocaman, E. S. and Akay, E. and Yıldız, Mehmet, "Tensile and bending properties of biaxial warp knitted textile composites", 1st Joint Turkey-Japan Workshop (JTJW) on Polymeric Composite Materials, Istanbul, Turkey: Sabanci University, May 2014

Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa, "High performance turning of high temperature alloys on multi-tasking machine tools", Denkena, Berend (ed.), 4th Machining Innovations Conference, Switzerland: Springer 2014, 1-9

Kekeç, İbrahim Taygun and Üstündağ, Barış Can and Güney, Mehmet Ali and Yıldırım, Alper and Ünel, Mustafa, "A modular software architecture for UAVs", 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2013, 4037-4042

Şahin, Caner and Ünel, Mustafa, "Under vehicle perception for high level safety measures using a catadioptric camera system", 39th Annual Conference of the IEEE Industrial Electronics Society (IECON 2013), USA: IEEE (Institute of Electrical and Electronics Engineers), November 2013, 4306-4311

Tofighi, Nima and Yıldız, Mehmet, "ISPH simulation of droplet spreading at different eotvos numbers", Simos, T. and Psihoyios, G. and Tsitouras, C. (eds.), 11th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM), Melville, NY, USA: AIP (American Institute of Physics), October 2013, 128-131

Chelliah, Pandian and Deniz, A. and Kuelen, C. and Bektaş, Gökhan and Boz, Talha and Melemez, Fazlı Fatih and Öztürk, Cem and Suleman, A. and Yıldız, Mehmet, "Simulation studies of spectral subtraction based temperature compensation of FBG sensor for structural health monitoring based on principal component analysis", 9th International Workshop on Structural Health Monitoring (IWSHM 2013), Stanford, CA: Stanford University, September 2013, 478-478

Rahmat, Amin and Safdari Shadloo, Mostafa and Tofighi, Nima and Yıldız, Mehmet, "The simulation of the Rayleigh Taylor instability for high density ratios and infinity bond number with SPH method", III International Conference on Particle-Based Methods: Fundamentals and Applications (Particles 2013), Spain: ECCOMAS, September 2013

Evren, Sanem and Ünel, Mustafa, "Sürü robotlarının serbest şekilli formasyon denetimi", Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı 2013 (TOK 2013), Malatya, Türkiye: İnönü Üniversitesi, September 2013, 954-960

Evren, Sanem and Ünel, Mustafa and Akşit, Mahmut Faruk, "Modeling and control of a variable speed variable pitch angle prototype wind turbine", 4th International Conference on Mathematical and Computational Applications (ICMCA 2013), Manisa, Turkey: Association for Scientific Research, June 2013

Tofighi, Nima and Yıldız, Mehmet, "Incompressible smoothed particle hydrodynamics simulation of three phase flows", 21st Annual Conference of the CFD Society of Canada, Sherbrooke, Canada: CFD Society of Canada, May 2013

Çakır, Esin and Karagüzel, Umut and Olgun, Utku and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan, "Dik kesme durumunda kesme sıcaklığının analitik modellenmesi ve deneysel olarak doğrulanması (Modeling of temperature distribution in orthogonal cutting and experimental verfication)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 129-138

Nizamoğulları, A. and Çomak, Alptunç and Budak, Erhan, "Paralel tornalama işlevini gerçekleştiren CNC torna tezgahının tasarımı, kesici uç ömrü ve kesme kararlılığı incelemeleri (Cutting tool life, cutting stability and process time review on designed and manufactured CNC turning machine which performs the parallel turning function)", 4. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2013), Izmir, Turkey: Ege University 2013, 339-357

Çomak, Alptunç and Koca, Recep and Özlü, Emre and Özşahin, Orkun and Öztürk, Erdem and Tunç, Taner and Uysal, Emre and Budak, Erhan and Özgüven, H. Nevzat, "Talaşlı imalat süreçlerinin kararlılığı ve takım tezgah dinamiği (Machining process stability and machine tool dynamics)", Şakar, Gürkan (ed.), 16. Ulusal Makina Teorisi Sempozyumu (UMTS 2013), Erzurum, Turkey: Ataturk University 2013, 114-124

Olgun, Utku and Budak, Erhan, "Machining of difficult-to-cut-alloys using rotary turning tools", 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Philadelphia, PA, USA: Elsevier 2013, 81-87

Çomak, A. and Koca, R. and Özkırımlı, Ö. M. and Budak, Erhan, "Modeling and simulation based design of variable pitch and variable helix milling tools for increased chatter stability", 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, -: Machines and Dies / Molds 2013

Khoda, AKM Bashirul and Özbolat, İbrahim T. and Koç, Bahattin, "Spatially multi-functional porous tissue scaffold", Bartolo, P. and Fernandes, P. (eds.), 3rd ECCOMAS Thematic Conference on Tissue Engineering (ICTE), Amsterdam, Netherlands: Elsevier 2013, 174-182

Yürüm, Yuda and Saner Okan, Burcu and Okyay, Firuze and Yürüm, Alp and Dinç, Fatma and Görgülü, Neylan and Alkan Gürsel, Selmiye, "An improved technique for the exfoliation of graphene nanosheets and utilization of their nanocomposites as fuel cell electrodes", Hristoforou, E. and Vlachos, D. S. (eds.), 2nd International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Zurich, Switzerland: Trans Tech Publications 2013, 9-12

Urbikain, Gorka and Olvera-Trejo, Daniel and Budak, Erhan and Wan, Min, Special issue on machining systems and signal processing: advancing machining processes through algorithms, sensors and devices, Elsevier, January 2023